วิศวกรรมโยธา Jobs

I will supply you with a DXF mesh of a newly placed slab and need a clear, standards-based report on its surface quality. The task is to analyse floor flatness (FF) and floor levelness (FL) across three separate test profiles, then present: • Overall FF and FL numbers for the whole slab • Individual FF and FL values for each of the three runs • Any noteworthy high or low spots that exceed ASTM E1155 limits Please follow ASTM E1155 throughout the calculations and reference the relevant sections so I can cross-check the results later. The final deliverable must be a Word document that includes both graphs and diagrams illustrating the measurement lines, point distribution and deviation trends. Embed any raw tables or intermediate data behind the visuals so I have full...

I need detailed shop drawings for rebar installation for a rectangular swimming pool. Requirements: - Accurate shop drawings - Experience with rebar detailing - Knowledge of swimming pool structural requirements Ideal Skills & Experience: - Structural engineering background - Proficient in CAD software - Attention to detail and precision

I am a structural engineer looking to partner with a PE for a project in Anchorage, AK. The scope of work is to check the roof framing to support new loads imposed from the removal and replacement of mechanical equipment. The project is located in Anchorage, AK.

I need a detail engineer for a building framework. The project involves: - Detailing of columns and beams - Connections and joints - Foundation details It's crucial that you adhere to specific codes and standards that I'll provide. Ideal skills and experience: - Expertise in structural steel detailing - Proficiency in relevant software (e.g., AutoCAD, Tekla) - Strong knowledge of engineering codes and standards - Attention to detail and accuracy Please include examples of similar work in your bid.

I have my eye on a 75-year-old home just outside Harrisville, MI. The house and a separate garage are partly built into a steep hill that rises 60 to 80 feet above the house. It appears that decades of slope wash have crept up around the buildings, but it is not easy to determine what is wash and what was there when the house was built. The first floor of the house is block. It is buried at the back so that the second floor is at ground level. It looks like a normal house in the front. Sort of like a walk out basement. The second floor is wood. There is no sign of failure inside that we can see There is signs of a small amount of water leaking leaking through the back wall in one location. The former owner was waterproofing the back wall (the materials are sitting there) but he died ...

I need a licensed Professional Engineer (P.E.) in Washington State to review and stamp my detailed crane design plans. These are workstation cranes with capacities of 100kg to 2000kg. The crane is intended for lifting at an industrial site. Requirements: - Must be a licensed P.E. in Washington - Experience with cranes and industrial site applications - Ability to review and approve detailed engineering plans Ideal Skills: - Structural engineering expertise - Knowledge of state regulations and compliance Please provide proof of licensing and relevant experience.

Project Overview Plot Size: 40 ft × 60 ft (2400 sq ft) Structure: Ground + 2 floors (G+2) Starting Level: Ground floor Architectural Requirements Floor Plans: Ground, First, and Second floors Elevation Design: Modern/Contemporary/Traditional style options Sections & Details: Cross-sections, staircase details, roof details 3D Views: Exterior and interior renders Structural Requirements Foundation Plan: Footing layout Column & Beam Layout: Structural drawings for all floors Slab Reinforcement: RCC slab details for each level Staircase Design: Dimensions, reinforcement, railing details Services & Utilities Electrical Layout: Wiring, switchboards, lighting plan Plumbing Layout: Water supply, drainage, sanitary fittings HVAC Plan: Ventilation, AC ducting Rainwater Harvestin...

Ich suche professionelle Unterstützung, um den Bauantrag für meinen maßangefertigten Imbisscontainer auf meinem Privatgrundstück vollständig zu erstellen und fristgerecht bei der zuständigen Behörde einzureichen. Aufgaben­umfang Folgende Unterlagen sind mind. erforderlich: 1. Bauantrag (Formular), 2. Baubeschreibung (Formular) ,3 Betriebsbeschreibung (Formular), 4. Angaben zum Brandschutz, 5. Bauzeichnungen (Grundriss, Schnitt, Ansichten), 6. amtlicher oder objektbezogener Lageplan, 7. Auszug aus dem Liegenschaftskataster, 8. Berechnungen zu den Herstellungskosten, Berechnungen zu Rauminhalt, zu Grund- und Nutzflächen, 9. Erklärung zur Niederschlagswasserversickerung 10. der statistische Erhebungsbogen Ich bevorzuge jemanden, der...

I need a construction layout survey. The survey should be detailed, with accurate measurements. Key requirements: - Construction layout - Detailed layout with measurements Ideal skills and experience: - Experience with construction layout surveys - Proficiency in surveying tools and software - Attention to detail and accuracy

I am ready to move a civil structure into construction and now need complete shop drawings for its slab-on-grade foundation. The architectural plans and structural design notes are already locked, so what I’m looking for is a set of fabrication-level drawings that a contractor can use without further clarification. The scope is limited strictly to the foundation—no framing or roofing at this stage. I will supply the PDF/ DWG background files, design criteria, and soil report as soon as we start. From you, I expect fully detailed plans, sections, reinforcement schedules, pier and edge thickening details, embed and anchor layouts, plus concise notes that reference the relevant code provisions. Deliverables (all in metric): • PDF sheets ready for issue to site &bul...

I have an industrial development in the pipeline and need an architecture engineer to steer the technical design. The assignment covers the full spectrum of industrial building requirements—from translating the operational flow into an efficient layout to ensuring every structural and MEP detail complies with local codes and safety regulations.

I need a structural engineer to design an LVL beam to support the second floor and replace the existing load-bearing wall that is 24’. The wall is adjacent to the living room, kitchen, and dining room on the main floor. The area measures 24 feet long and 20 feet wide. The joists are 2x8, spaced 16 inches on centre, perpendicular to the load-bearing wall, and are 12 feet long on one side and 8 feet on the other. The roof of the second floor is framed with trusses that transfer the load to the exterior walls, so none of the interior walls on the second floor are load-bearing. The main floor is supported by joists of the same size and a steel beam in the basement, which rests on the concrete foundation at one end, a steel post in the centre, and a 4-ply 2x4 post at the other end. Re...

Need Plans corrections per City of Phoenix comments and calcs of civil with license, I need to meet first and verify license with ID. I need a partner for future projects.

My residential build is already in the construction phase and I need a seasoned civil engineer to keep everything structurally sound and on schedule. The core of the assignment is three-fold: structural engineering oversight, day-to-day site supervision, and rigorous quality control/inspection throughout the remaining works. I will hand over current drawings, contractor schedules, and material specs so you can review what has been executed and flag anything that conflicts with design intent or local code. Regular presence on site—either in person or via coordinated virtual walk-throughs—is essential for you to: • Verify all structural elements match approved plans and engineering calculations. • Issue immediate corrective actions when workmanship or materials fall...

I need a detailed boundary survey for construction planning. The survey should focus on topography and elevation, and include marked boundary corners and lines. Key requirements: - Accurate measurement of property boundaries - Detailed topographic and elevation data - Marked boundary corners and lines on-site Ideal skills and experience: - Professional surveying certification - Experience with topographic surveys - Proficiency in surveying equipment and software - Attention to detail and accuracy - Ability to provide a comprehensive survey map Please provide samples of previous work and an estimated timeline for completion. None: Hello, My name is Janice Smith, and I am the developer for a small residential project in Hamilton County, Tennessee. I am reaching out to request your survey...

I need detailed as-built drawings prepared for USACE project completion documentation. The drawings must accurately reflect all systems and components. Required Systems: - Civil - Structural - Architectural - Plumbing - Mechanical - Electrical Ideal Skills and Experience: - Proficiency in AutoCAD or similar software - Experience with USACE standards and requirements - Attention to detail and accuracy - Ability to work within budget and deadlines Please include relevant experience in your bids.

Create a dynamic Excel workbook tailored for the South African market, using SI units (m, kN, MPa), to design and analyse reinforced concrete T-beams. Scope: Reinforced concrete T-beam design and analysis (including shear stress, bending, reinforcement requirements, etc.) Compliance with relevant South African design standards (e.g. SANS codes / Eurocode where applicable) Workbook requirements: Fully linked formulas across structured sheets Clear separation of inputs, assumptions, and calculated outputs Detailed design tables for reinforcement (flexural and shear), section properties, and load effects Automated calculations with minimal manual input Embedded tables and charts for visualisation and validation User-friendly layout with clear labels and guidance Additional requirement: ...

I have several wiring diagrams that I need reviewed and translated into clear termination schedules. The drawings only require a basic-overview level of detail, but every note you add must still align with recognised industry standards so the documentation is ready for hand-over to our site technicians. Here’s how I picture the workflow: • Analyse the supplied wiring diagrams and flag any inconsistencies or missing references. • Produce a concise termination schedule for each diagram, listing points, destinations and wire identifiers. • Return the updated drawings (PDF or DWG) annotated where needed to show the terminations in context. I will supply the original files and a sample schedule format as soon as we start. Accuracy and tidy presentation matter more tha...

I require a concise Bill of Quantities that covers the groundwork, formwork and concrete work for a handful of footings and their associated excavation. All measurement must follow the ANZSS rules and the take-off has to be completed directly in CostX. Scope The drawings are ready and the package is small, limited to excavation, footing concrete, reinforcement, formwork and any incidental items that ANZSS requires to be shown. No other trades are involved. If you are comfortable working in CostX under ANZSS and can meet the two-day window, this should be a straightforward assignment.

I need detailed steel reinforcement drawings from existing foundation plan . The final set should be delivered in both PDF and editable DWG formats. All I’m looking for is bar placement for the concrete foundation, slab and foundation wall

I’m ready to turn my completed design for a 240 sq ft one-bedroom apartment into a fully permitted reality on my single-story home in St Petersburg, Pinellas County, Florida, USA. I’m looking for an architect who can take my finished layout and develop the construction plans and documents the city will accept for a rental unit. The job centres on translating my drawings into a permit set that satisfies the current Florida Building Code as well as local zoning and flood-zone regulations. Because the space will operate as a separate rental, the plans must clearly address ingress/egress, fire separation, sound attenuation, HVAC, plumbing, and dedicated electrical service. Key deliverables • Signed and sealed architectural drawings (site plan, floor plan, elevations, sec...

I have purchased a pre-engineered metal tube frame kit for a residential outbuilding in Spokane County, Washington (between 500 – 1,000 sq ft). To receive the building permit the county requires a Washington-licensed structural engineer to review the kit, confirm it meets local wind/snow/seismic loads, and issue stamped construction drawings plus the accompanying structural calculations. Because the kit follows a standard manufacturer layout, no custom architecture is needed—just the structural stamp, a compliant foundation/slab plan, and any notes the county typically asks for. Spokane accepts digitally signed PDFs, but I’ll also need one hard-copy set for my records. Deliverables • Full set of Washington-stamped structural drawings (PDF) • Foundation/sla...

I’m ready to put up a detached, two-car garage that measures roughly 22' × 23' with a noticeably high-pitched roof. The look I want is clean-lined and modern, yet it has to be built in brick so it blends with my home’s exterior. Inside, I need the roof volume used efficiently, so please factor a full-width storage loft into the design. What I’m looking for from you: • A complete drawing set (site plan, floor plan, elevations, roof framing, and any necessary structural details) prepared for permitting in my area. • A concise material schedule that calls out the specific brick type, roof covering, framing members, door specs, and any hardware needed for the loft access. • If possible, a simple 3D model or a few rendered views so I ca...

I need detailed design specifications for piers to support a barndominium. The design must be based on soil testing and comply with building standards. Key requirements include: - Size and dimensions - Material type - Load-bearing capacity The most critical aspect is load-bearing capacity. While I have some specifications, I'm open to recommendations. Ideal skills and experience: - Structural engineering - Knowledge of building codes and soil mechanics - Experience with residential foundation design

Título del Proyecto: Ingeniería de Instalaciones para Casa Habitación 183 m² de construcción] Descripción del Proyecto: Solicito la elaboración de los planos de ingeniería para una casa habitación de 2 niveles y 183 m² de construcción. Ya cuento con el diseño arquitectónico completo en formato AutoCAD (.dwg). Alcance requerido (Entregables): Necesito un paquete integral que incluya los siguientes planos detallados: Instalación Hidráulica: Red de agua fría y caliente, incluyendo alimentación para calentador solar con respaldo de gas, isométricos y cuadro de simbología. Instalación Sanitaria y Pluvial: Red de drenaje, ventilación y bajadas de agua de ...

I need a foundation designed for a single-family home on clay soil. The foundation type should be a crawl space, with standard load-bearing capacity. Key Requirements: - Design for crawl space foundation - Adapted for clay soil conditions - Standard load-bearing capacity Ideal Skills and Experience: - Experience with foundation design in clay soil - Knowledge of crawl space foundations - Structural engineering expertise

I’m ready to turn my 25-acre parcel into a single-family home neighborhood and need a detailed subdivision layout produced directly in CAD (DWG or compatible). An existing canal borders the entire south edge and part of the east; I want to cut additional canals so that every lot—minimum 12,000 sq ft—has direct water frontage. Your plan should maximise the lot count without sacrificing sensible road circulation, utility corridors, and drainage. Please place streets, sidewalks, and any necessary easements so they work naturally with the canal network, then show approximate building pads on each lot. Deliverables • Fully editable CAD file (DWG/DXF) with layers clearly organised for lots, centerlines, rights-of-way, and canals • A colour PDF exhibit suitable...

I’m looking for a civil engineer who can take full responsibility for the structural design of a new residential foundation. The project is still at concept stage; I have a site survey and will share soil data as soon as the geotechnical report is finished. What I need from you is a complete foundation package that satisfies local building codes and is ready for permit submission. Here’s what I have in mind: • Calculations covering bearing capacity, settlement, and seismic/wind loading • Detailed footing, slab, and reinforcement drawings in DWG/PDF • A concise design brief that explains assumptions, codes followed, and key design checks If you are licensed to stamp drawings in my jurisdiction, please note that in your proposal—otherwise, an unstamped desi...

I need a formal site plan (stamped/sealed) showing the following - 1. A 1200 sq ft structure (as indicated in the attached informal site plan) 2. A 2400 sq ft structure ( as indicated in the attached informal site plan) 3. Commercial grade septic tank, showing connections and drain field 4. Water tank in lieu of the hydrants 5. Fire lane 6. Parking (if required by the permitting authorities) 7. New Water lines 8. Plans for a new driveway as shown in my earlier site plan 9. Any water drainage (since the impervious coverage is less that 20% I don't believe this will be needed)

I need a complete, permit-ready drawing package for a single-family, ranch-style modular home that will be placed in ZIP 36541. The design must feature an open floor plan with a split-bedroom layout, and every sheet has to carry a current State of Alabama architect or engineer stamp. Scope of work – Foundation engineering: footings, piers, and all attachment/anchorage details suited to local soil and wind requirements. – Full architectural, structural, electrical, plumbing, and mechanical sheets formatted for county submittal. – Code notes and calculations that satisfy the latest Mobile county Alabama-adopted IRC/IBC. – Separate schedules for multiple identical units so I can reproduce the same plan on several lots. After I file for the permit, I may receiv...

We are looking for a Washington State (WA) licensed Architect to review and stamp a set of architectural drawings for a permit submission. The project is for a USA-based client, and the drawings are already prepared. We need a qualified architect to review for code compliance and provide an official stamp for submission to the local authority.

• Project: Attached Pavilion / Patio Cover • Location: Rear of residence • Size: 20’-0” wide (along house) × 18’-0” deep • Style: Open gable roof (not shed) • Use: Covered outdoor patio ⸻ STRUCTURAL INTENT (DO NOT CHANGE DESIGN) • Front support: ONLY (2) posts total • Beam: Engineered LVL spanning full 20’ • Posts: 6x6 structural (wrapped for appearance) • Roof type: Open gable, ridge perpendicular to house • Ceiling: Exposed structure with tongue & groove pine Important note to include: “Design intent is a clean, open span with no intermediate posts.” ⸻ CRITICAL DIMENSIONS • Width along house: 20’-0” • Projection: 18’-0” • Post lo...

I have a fully classified LiDAR point cloud covering roughly 30 km of rural roadway. I now need that data converted into clean, production-ready Civil 3D files that match our internal drafting standards. Scope • Build a detailed road surface model from the cloud, stripping out noise and vegetation while preserving curb and edge definition. • Generate a comprehensive topographic map with spot elevations and breaklines. • Produce a 3D CAD construction model that includes: – Accurate elevation contours at the intervals you normally use for roadway design – Clearly delineated road markings, lane lines and centreline – All visible road edges, kerbs and shoulder limits Requirements • All deliverables must follow my company-specific laye...

I need a complete ETABS model for a residential high-rise (eight floors and above). All architectural and structural drawings are already prepared, so you will be working from detailed plans rather than guessing the layout. What matters most to me is an accurate 3-D model that reflects the provided column grids, slab thicknesses, wall locations, and load cases. Please set up the full analysis environment—materials, section properties, lateral load combinations, and any required diaphragm assignments—so I can open the file and run checks immediately. Deliverables • ETABS *.edb project file ready for analysis • Brief notes explaining modelling assumptions, load combinations, and any simplifications made If you prefer a particular ETABS version, mention it s...

I'm seeking a skilled civil engineer specializing in stormwater management for a subdivision project in Florida. The project is currently in the design and planning phase. Key Requirements: - Conduct comprehensive site analysis and evaluation - Collaborate on stormwater management design - Assist in permit acquisition Ideal Skills and Experience: - Expertise in stormwater management - Familiarity with Florida regulations - Strong analytical and design skills - Experience in subdivision projects Please provide relevant experience in your bids.

I’m looking for a licensed Oregon Professional Engineer to produce a full HVAC design package for a new-build single-family home that will run on a high-efficiency heat pump system. The scope is straightforward: run the Manual J load calculations, size and select the equipment, design the complete ductwork layout, and supply stamped drawings and calcs that meet the Oregon Mechanical Specialty Code so my permit submittal sails through on the first round. Deliverables • Manual J/S load reports (PDF & native file) • Duct layout per Manual D with sizing, CFM, and velocity shown on plans • Equipment schedule and design narrative covering heat pump selection and controls strategy • PE-stamped mechanical sheets ready for county permit upload (DWG + PDF) ...

I need plans drawn and stamped for a commercial space based on a basic sketch I will provide. Key requirements include: - Install 7 sinks (4 hand wash, 1 kitchenette, 2 utility) - Add a water heater - Install 6 electrical outlets - Modify non-load-bearing and partition walls Ideal skills and experience: - Experience drafter with P.E. stamp - Plumbing and electrical expertise - Ability to work from basic sketches or rough CAD

I need a detailed house plan for a residential component within a farm shed. This is for a secondary residence as part of a dual occupancy Development Application (DA). Requirements: # Please note that I have developed a draft floor plan of the area which can be tweaked and fine tuned. # I also have a shed plan to assist with the process. # The bedrooms, bathroom and walk in robe ceiling heights are to be 2.7m # The ceiling in the kitchen and lounge area is to start at 2.7m from the kitchen wall and 4.0m at the northern wall of the lounge room (NB shed height at eave is 4.8m). # Please include some form of eave at the top of the north facing windows to prevent direct sunlight entering the residence in summer but allowing sunlight to enter during winter. Ideal skills and experience: - Pro...

Need Structural Drawings for 2nd & 3rd Floor (G+3 Building) Hello, I am looking for an experienced Structural Engineer to prepare structural drawings for the 2nd and 3rd floors of my G+3 building. The basement and first floor are already constructed, and I need proper structural design and detailing for the upper floors ensuring safety and continuity with the existing structure. Project Details: • Building Type: Residential/Commercial (Mixed use) • Status: Basement + Ground + 1st Floor completed • Requirement: Structural design for 2nd & 3rd Floor • Architectural layout is available (DWG/PDF) Scope of Work: • Column layout continuation and load analysis • Beam and slab structural design • Reinforcement detailing (RCC drawings) • ...

J’ai besoin de mettre au point un plan de génie civil complet pour un bâtiment ou des travaux publics. Le livrable doit présenter : • Le tracé général et les coupes essentielles ; • Les dimensions cotées prêtes pour dépôt administratif ; • Un jeu de fichiers PDF et la source modifiable (AutoCAD ou équivalent). Je fournirai dès le démarrage les données topographiques et les contraintes réglementaires locales. Je souhaite un rendu clair, adapté aux normes françaises, avec la possibilité de faire une passe de retouches si nécessaire pour intégrer les remarques des autorités.

Hi, I require all structural details to be fully redrafted into a unique New Engineering company Australian drafting standard. These must become our company’s proprietary detail library. Important: These must NOT resemble the original drawings stylistically. Engineering concepts remain the same but drafting must be original. Requirements: • All details must be redrawn from scratch • Do NOT trace existing details • Create unique line hierarchy (slab lines, beam lines, wall lines etc) • Create your own section presentation style • Create organised headings and title structure • Develop consistent reinforcement presentation • Develop consistent dimension placement rules • Create a unique note format • Use proper structural drafting conv...

I’m looking for a licensed structural engineer to review a single-family residential project and issue a formal verification letter that I can submit to my local building department and lender. The house is already framed and dried-in; what I still need is professional confirmation that the foundation, framing, and roof structure all meet current code requirements and were built in accordance with the approved plans. Here’s what I need from you: • A brief site or plan review of the foundation, framing, and roof structure (whichever you prefer—on-site visit or detailed plan analysis, depending on your state’s rules). • A signed and sealed letter, on your professional letterhead, clearly stating that these three elements are structurally sound and compl...

I need a licensed civil / structural engineer who can quickly prepare two documents for a small ground-floor shop (8 ft × 14 ft, roughly 10.4 m²) in Delhi 110042. The space is already built and in good condition, but I have no existing drawings, so both items will have to be created from scratch and stamped for government use. The first deliverable is a Structure Safety Certificate that satisfies the Municipal Corporation of Delhi’s requirements. The second is a simple site plan, again in line with Delhi-specific codes, showing the shop’s footprint and surrounding plot as required for my MCD trade licence application. I will supply on-site photos, measurements and any other details you request. What I need back is: • A signed, sealed PDF of the safety certifi...

My upcoming residential building is ready to move from concept to construction, and I need an experienced civil engineer who works on a straightforward per-meter rate instead of the usual percentage-of-project model. Your main focus will be structural analysis followed by hands-on project management through to completion. Here’s the flow I have in mind: • Structural analysis: Prepare all design calculations, load assessments, reinforcement detailing, and stamped drawings. I normally review in AutoCAD and am comfortable if you prefer SAP2000, ETABS, or similar for modeling—just be ready to supply the native files along with PDF sets. • Project management: Translate the approved design into a practical work plan, develop a detailed schedule, and oversee day-to-day pr...

I’m looking for a California-registered architect to move my residential project through the design phase and have it ready for approvals inside the next four weeks. The conceptual work is complete; what I need now is a polished set of CAD/Revit drawings, energy-code (Title 24) documentation, and any details a city building department will require for a straightforward permit review. Your stamp must be valid in the State of California, and you should be fully comfortable with the current CBC as well as local planning nuances. If you can coordinate basic structural notes or flag items that typically slow permitting, that will be a plus. I’m available daily to answer questions, supply sketches, and review progress, and I’d like to schedule two intermediate check-ins befo...

I'm looking for a detailed timber framing plan for a 3m by 4m workshop shed. The shed will have a skillion (sloped) roof from left to right, and should be constructed using pine timber (mostly 90x35mm for studs, can be larger for roof rafters). There will be a 1400(height)x1200mm window on the LEFT (4m) wall and a door, ideally double door as well as a separate 600x600mm window on the FRONT (3m) wall. The frame will sit on a 4x3m concrete slab (flush to edge unless we make the shed smaller), clad with timber boards and the roof will be Klip-Lok sheeting. Requirements: - Detailed framing drawings - Material list Ideal Skills: - Experience in timber framing - Knowledge of shed construction - Proficiency in creating detailed architectural plans

I’m finalising the HVAC design for a new build in Fruitland, Idaho and need an ACCA-compliant Manual J analysis before I order equipment. The plan is to condition the home with two separate Mr. Cool DIY® 5th Generation multi-zone systems, so the numbers have to be accurate. Here’s what I need from you: • A complete Manual J report showing both room-by-room and overall house heating and cooling loads. • Clear capacity recommendations for each of the two multi-zone systems (including your recommendations of how many wall units and the length of line set for each system), including suggested indoor unit sizing per room and total outdoor unit tonnage. • All calculations based on Fruitland, ID outdoor design temperatures and humidity profiles. • Should...

I need a full structural design for a ground-mounted array that will hold 16 solar panels and safely withstand local wind speeds of 160 km/h. The site is perfectly flat, so the design can assume a level foundation without the extra complexity of terracing or stepped footings. I would like the primary framing and supports detailed in steel—please base all section sizes, fasteners, and corrosion-protection notes on that choice. What I expect from you • Complete set of dimensioned drawings (plan, elevation, and relevant sections) in PDF and the original CAD format. • Structural calculations that verify deflection, uplift, and overall stability at the stated wind load. • A concise material list with steel grades, coating specs, and hardware. • Simple installa...

I need an experienced structural engineer to review, stamp, and prepare my steel building design for mass production and resale as a Pre-Engineered Metal Building (PEMB). The design includes structural plans and components. Requirements: - Ensure compliance with International Building Code (IBC) - Prepare engineered plans for mass production - Stamping for structural integrity and code compliance - Experience with residential steel building design Ideal Skills and Experience: - Licensed professional engineer (PE) - Expertise in residential steel structures - Familiarity with IBC and PEMB standards - Strong background in structural analysis (linear static preferred) Please provide examples of similar work and your credentials.

I need a skilled contractor to provide structural steel and foundation engineering drawings for a concrete batch plant. Requirements: - Structural Steel Elements: Beams, columns, bracing, and frames. - Foundation Type: Pile foundation. - Load Requirements: Standard load capacity. Ideal Skills and Experience: - Expertise in structural steel fabrication and erection. - Experience with pile foundations. - Knowledge of standard load specifications. - Relevant certifications and safety training.