Solidworks Jobs

I am looking for a skilled designer to create STL files for a 3D printing project. I am open to suggestions regarding the exact dimensions of the design. The purpose of the 3D design is specifically for 3D printing. Skills and Experience: - Proficiency in 3D design software - Experience with creating STL files for 3D printing - Strong understanding of design principles and aesthetics - Ability to suggest and incorporate dimensions based on project requirements

I am looking for a skilled freelancer who can create both 2D drawings and 3D renderings for a new sunglasses design. Requirements: - Ability to create detailed and accurate 2D drawings and 3D renderings - Familiarity with sunglasses design and manufacturing processes - Strong attention to detail in capturing measurements and specifications Ideal Skills and Experience: - Proficiency in CAD software for creating technical drawings and renderings - Previous experience in creating technical drawings for fashion or accessory designs - Knowledge of sunglasses design and materials - Ability to work collaboratively and communicate effectively The desired completion time for these drawings is flexible, as I am willing to work with the freelancer to determine a suitable timeline.

Gas Detection Modelling (HazMap 3D) We are looking for a competent engineer who can perform gas detection modelling and selection for a specimen storage facility. The facility uses 70% ethanol as a preservative agent and requires a reliable and safe gas detection system to prevent fire and health hazards. The engineer will be responsible for: - Using HAZMap 3D or equivalent software to create a 3D model and simulate the gas dispersion and concentration under various scenarios. - Selecting the appropriate type, number and location of gas detectors based on the modelling results and the relevant standards and regulations. - Preparing a detailed report and documentation of the modelling and selection process, including the assumptions, parameters, calculations, results and recommendations....

I am looking for a freelancer who can create a detailed technical drawing of a pushchair based on a specific model that I have in mind. The drawing should include dimensions to ensure accuracy. I do not have a preference for the software to be used, so the freelancer can use any software they are comfortable with. This technical drawing will be sent to a manufacture for production so has to be highly detailed and accurate. Ideal Skills and Experience: - Proficiency in 2D technical drawing - Experience in creating detailed drawings with dimensions - Familiarity with pushchair design and construction - Knowledge of CAD software, such as AutoCAD or SolidWorks (although not required)

โปรดลงทะเบียน หรือเข้าสู่ระบบ เพื่อดูรายละเอียด

Product Design I am looking for a designer to help me with the specifics of my product idea. I have a general concept in mind but need assistance in turning it into a tangible design. The main function of the product is for patient use. Ideal Skills and Experience: - Experience in product design and development - Strong ability to translate concepts into detailed specifications - Understanding of consumer and industrial product requirements - Proficiency in CAD software for creating 3D models and prototypes - Knowledge of materials and manufacturing processes - Attention to detail and ability to meet project deadlines Send me a message for more details! Need 2-3 ideas and some sketches. Today delivered

I am looking for a skilled freelancer who can assist me with shoe modelling for my product design project. I want the sole, insole and the sides to be on separate layers to be able to 3D print them as a whole and separate items. I also want to be able to open the file in Cinema 4D with layers. The shoe has to follow specific dimensions Type of Shoe Modeling: - 3D modeling Design: - I have a detailed design in mind Number of Shoe Models: - I need 1-3 different shoe models Ideal Skills and Experience: - Proficiency in 3D modeling software - Strong understanding of shoe design and construction - Ability to bring detailed designs to life in a realistic 3D model - Attention to detail to accurately capture the essence of the design - Creativity to add any necessary refinements or...

I am looking for a skilled freelancer who can create a 3D model for 3D printing based on a 2D plan. The details of the project are as follows: Size of the 3D model: The model should be scalable, with a maximum size of 1 meter. Design concept: I have a clear design in mind for the 3D model. Printing material: The model will be printed with plastic. Skills and experience required: - Proficiency in 3D modeling software and techniques. - Experience in creating 3D models for 3D printing. - Knowledge of plastic materials and their properties for 3D printing. If you have the necessary skills and experience, please provide examples of your previous work in 3D modeling for 3D printing. I have attached an image of the model. I will share the whole plan if you are interested.

Hello, I know solidworks and autocad programs very well and I am a student, I need income, can you give me a job.

I am looking for a skilled 3D designer to create a detailed 3D model with textures for my product design project. Requirements: - Expertise in product design - Proficiency in 3D modeling software - Ability to work with a provided prototype - Experience in creating detailed 3D models with textures - Strong attention to detail and ability to replicate the prototype accurately If you have the necessary skills and experience, please submit your proposal and include samples of your previous work in product design.

I am seeking an experienced Solidworks sheet metal designer to complete the design of a final product for manufacturing. The product is an electrical transformer substation. Target for completion of the project is within 2~3 weeks. The successful candidate should have an extensive portfolio of sheet metal designs, as well as a clear understanding of the principles of metalworking and manufacturing processes. The successful candidate will be expected to create a 3D model of the product and prepare all necessary drawings . Please apply if you have advanced 3D design skills and experience in Solidworks sheet metal design. With your help, we will be able to get our product to market on schedule.

Hello I need an expert in Tunnel Design and Structural engineering Please apply if you have the required expertise.

Mechanical Design and Prototyping: Design the mechanical structure of the robot arm that mimics the hand's movements during hair ventilation. Create detailed CAD drawings and 3D models of the robot arm components. Prototype the mechanical system to test its feasibility and functionality. Robot Arm Actuators and Control: Select suitable actuators (e.g., servo motors, stepper motors) for the robot arm. Develop the control system and algorithms that allow precise control of the robot arm's movements. Implement position and force sensors for feedback control. Needle Manipulation System: Design a mechanism for holding and manipulating the ventilating needles. Ensure that the needles can be accurately inserted into the mesh to secure the hair strands. Machine Vision and Image Proces...

I am looking for a freelancer who specializes in 3D modeling to help bring my specific design to life. I have a clear vision of what I want and need someone who can accurately create a detailed and precise 3D model based on my design. The ideal candidate should have experience in 3D modeling and be proficient in using SolidWorks. The final deliverable should be in a file format that is compatible with 3D printing, such as STL, STEP, or IGES. Attention to detail and the ability to meet deadlines are also important qualities for this job.

I am looking for an AutoCAD expert who is proficient in Siemens NX 12. The project involves designing a complex structure with many parts, assemblies, and intricate details. However, there is no need for the project to be 3D printed. Ideal skills and experience: - Proficiency in AutoCAD and Siemens NX 12 - Strong knowledge of 3D modeling and assembly design - Attention to detail for intricate designs need to only autocad 3d sketch on simens nx. - Ability to manage complex projects with many parts and assemblies.

Materials and Manufacturing Project I am looking for a freelancer who has experience in materials and manufacturing to assist with my project. The ideal candidate should have knowledge in working with metals, plastics, and fabrics. Manufacturing Processes: - The freelancer should be familiar with injection molding, casting, and 3D printing. It would be beneficial if they have experience in these specific manufacturing processes. Product Units: - The freelancer should be able to handle the production of a large quantity of units. The project requires manufacturing more than 500 units, so experience in mass production is preferred. Overall, I am seeking a freelancer who has expertise in materials and manufacturing, specifically with metals, plastics, and fabrics. They should also have ...

I am looking for a skilled Autocad designer with experience in electrical design. Purpose of the Autocad design: Electrical design Specifications: I am open to suggestions and do not have specific dimensions or specifications for the design. However, I would like the design to be detailed with notes and labels. Ideal Skills and Experience: - Proficient in Autocad - Strong understanding of electrical design principles - Ability to create detailed designs with notes and labels - Attention to detail and accuracy in design - Knowledge of industry standards and best practices in electrical design If you have the necessary skills and experience in electrical design using Autocad, please submit your portfolio and relevant work samples for consideration.

I am in need of a SolidWorks expert for a small gig. The specific task that I need assistance with is 3D modeling. The complexity level of the task is intermediate. I have precise dimensions and design details for the model and I need that with simulation report. Ideal Skills and Experience: - Expertise in SolidWorks - Strong proficiency in 3D modeling - Experience with intermediate level projects - Ability to work with precise dimensions and design details Fixed budget - INR 1000

More info will be shared in chat

more info wil be shared in chat

I am looking for a skilled 3D printing professional who can help me with a personal use project. The project involves printing a highly detailed intricate design using plastic material. Skills and experience required: - Proficiency in 3D printing techniques and technologies - Experience with printing highly detailed intricate designs - Knowledge of working with plastic materials - Attention to detail and precision in printing complex models - Ability to troubleshoot and solve any issues that may arise during the printing process

I want to design a 3d model of a 2005 SaaB 9-3 motorcar. See the images for the car. I want the file format in DWG or Dxf. The top 3 models will be considered for a major project. The winner will get a 5-star review.

more info will be shared in chat

Hello I need an expert in Tunnel Design and Structural engineering Please apply if you have the required expertise.

AutoCAD/Solidworks Draftsman for Architectural Projects Skills and Experience: - Proficient in AutoCAD - Experience in architectural drafting - Detail-oriented and able to accurately translate design concepts into technical drawings Project Requirements: - I am looking for a draftsman who is experienced in using AutoCAD for architectural drafting. - The draftsman will be responsible for creating detailed and accurate plans for various architectural projects. - The projects will require creating 4-7 drafts, ensuring that all measurements and specifications are precise. - The draftsman should have a strong attention to detail and be able to accurately translate design concepts into technical drawings. - Knowledge of architectural standards and regulations is preferred. - Familiarity with S...

I am looking for a CFD expert to conduct fluid flow analysis using ANSYS with a high level of detail for engineering design. The ideal candidate should have experience in CFD analysis and proficiency in using ANSYS software. The project requires expertise in fluid flow analysis and the ability to provide analysis results with a high level of detail for engineering design. Skills and experience required: - Strong background in CFD analysis - Proficiency in using ANSYS software - Expertise in fluid flow analysis - Ability to provide analysis results with a high level of detail for engineering design

We need to do some modification on a development work. More details would be provided on discussion.

I am seeking a skilled freelancer to design and create a small electronics enclosure for my project. The enclosure should have the following specifications: Size Requirement: - The enclosure will be small, with dimensions max 100 x 60 x 10 mm - See pictures for first design draft Intended Use: - The enclosure will be for electronic sensors inside shipped goods. Can get cold and hot but not wet. - There will be a battery cover to easily change batteries - The design should include a low cost 4-wire connector that will allow the device to be electrically connected to a docking station. The docking station will be designed later, based on this design. - It should either be a cut-out for GPS antenna or a thicker enclosure to accommodate it. The antenna is 8 mm thick while rest of the bo...

I am looking for a skilled mechanical designer to assist me with a product design project. I have some preferences regarding the materials and manufacturing processes, but I am open to suggestions. The intended use of the product is for industrial purposes. Ideal skills and experience for this job include: - Strong proficiency in product design and CAD modeling - Knowledge of industrial design principles and best practices - Experience working with various materials and manufacturing processes - Ability to understand and incorporate specific design requirements - Familiarity with industry standards and regulations related to product design for industrial use.

Hi. we need fusion360 user that can model 3D dome with ribs over it. we have dimensions and can share over chat. please let us know about the availability

I am looking for a Solidworks expert to assist me with a 3D modeling project. I have general ideas for the model but need help with the specifics. I would also like the final 3D model to be rendered. Skills and Experience: - Proficiency in Solidworks - Experience in 3D modeling - Strong attention to detail - Ability to work with specifications and provide suggestions - Knowledge of rendering techniques

I am looking for a SketchUp expert who can help me produce a design for a product prototype that needs to be completed within a week. The design will be used for CNC machining purposes. Requirements: - Expertise in SketchUp to create accurate and detailed 3D models - Experience in product prototyping and CNC machining - Proficiency in working with specific dimensions and materials - Ability to deliver high-quality designs within tight deadlines Skills and Experience: - Strong knowledge of SketchUp, including advanced modeling techniques - Familiarity with CNC machining processes and requirements - Experience in creating designs for product prototyping - Attention to detail and precision in creating accurate 3D models - Ability to work with specific dimensions and materials provided by t...

I am looking for a skilled freelancer who specializes in CAD design to create a complete and detailed mechanical drawing for my new design project. The ideal candidate will have experience in creating advanced CAD designs with all necessary details and specifications. Skills and Experience Required: - Proficiency in CAD design software - Strong attention to detail - Ability to understand and interpret complex technical drawings and specifications - Experience in creating advanced CAD designs with all necessary details and specifications

I am looking for a CAD designer who can assist me in designing a new shipping container. The purpose of the CAD drawing is to create a blueprint for the container's layout. Specifically, I have specific dimensions that need to be incorporated into the design. Therefore, I am seeking a designer who is proficient in working with specific dimensions and can accurately translate them into a CAD drawing. The CAD drawing should be in 2D format, as this is sufficient for my needs. Ideal skills and experience for this job include: - Proficiency in CAD software - Ability to work with specific dimensions and accurately translate them into a design - Strong attention to detail to ensure the layout is accurately represented - Previous experience in container design or similar projects would...

I am looking for a freelancer to design an oil and fuel interceptor for an industrial process. The purpose of this interceptor is to separate oil and fuel from water, preventing pollution in water bodies. The expected capacity of the interceptor should be medium, ranging from 10,000 to 50,000 liters. Key design features that I am looking for include easy maintenance. The interceptor should be designed in a way that it is easy to clean and maintain. Ideal skills and experience for this job include: - Experience in designing oil and fuel interceptors - Knowledge of industrial processes - Understanding of environmental regulations and pollution prevention - Proficiency in CAD software for designing the interceptor - Ability to create cost-effective designs without compromising on e...

I am looking for a skilled 3D modeler to create highly detailed and realistic 3D models of industrial machinery. Skills and Experience: - Proficiency in 3D modeling software such as AutoCAD or SolidWorks - Experience in creating highly detailed and realistic 3D models - Knowledge of industrial machinery and its components - Attention to detail and ability to accurately replicate the machinery - Ability to work within the client's specific requirements and provide regular updates and revisions as needed The ideal candidate should have a strong portfolio showcasing their previous work in 3D modeling of machinery, especially in the industrial sector. They should also be able to work independently and efficiently to meet project deadlines.

I have multiple STL’s of statues. I need the inverse of these statues made so I can print the mould to pour wax into to get a wax replica of the 3D print. This is quite easy in Z Brush, but I don’t use Z Brush. I will pay AUD$25 per model. Also have other and future work that pays more of sculpting new models for me. Firm on the price. Whoever gets the job will have to show they can do it first. So one trial job (which I will pay for when it has successfully printed) and then the guarantee of atleast 5 more jobs and possibly many more.

Je recherche une personne compétente comme vous, spécialisée dans la conception mécanique et électrique d'appareils pour un projet stimulant. Mon objectif est de collaborer avec vous pour la réalisation d'un prototype novateur dans le domaine du rasage électrique. Si vous possédez une expérience avérée dans la conception de dispositifs similaires et que vous êtes en mesure de travailler avec rigueur et efficacité sur des projets innovants, je serais enchanté de discuter des détails de cette mission avec vous.

I am looking for a skilled 3D renderer to create a floor plan rendering for a small space (less than 1000 sq ft). I have a specific design in mind and would like the rendering to be based on that. Skills and Experience: - Proficiency in 3D rendering software - Ability to accurately translate design ideas into realistic renderings - Attention to detail in capturing the dimensions and layout of the space - Strong communication skills to understand and incorporate client requirements

Hey i need some 1u server case for a storage server with four HDDs. You can use as example this one I need the same one but only as 1U (4.445cm) and 19inches printebl for my 3d Printer. So you need to agjust the size of the example and and some more two disk in front of the case. Like the picture in the attach files. For the disk size you can use this 3d file

I am looking for a freelancer who can create a 3D CAD drawing using AutoCAD based on my rough sketch or idea. I'm trying to make a product but I only have hand drawings, need 3D drawing so that I can get samples made. Skills and Experience: - Proficiency in AutoCAD - Experience with 3D CAD drawing - Ability to interpret rough sketches and ideas into detailed CAD drawings

I am looking for a skilled freelancer to help me with my project to research and find a suitable 3D printer with a webcam for prototyping purposes. Here are the specific requirements: Purpose: - The main purpose of the 3D printer with webcam is for prototyping. Model/Type: - I don't have a specific model in mind, but I do have some preferences that I would like the freelancer to consider. Budget: - My budget range for the 3D printer with webcam is under $500. Concepts for Products - Create a minimum of three sketches or drawings illustrating the concepts and principles of your product. Draw the concepts using any software; hand drawings are also acceptable, but make sure they are readable and clear. The primary attributes, measurements, and other details of your product must be di...

I am looking for a skilled CAD designer who specializes in architectural design. I have specific design instructions that I would like to be implemented for commercial use. Ideal Skills and Experience: - Proficient in CAD software (e.g. AutoCAD, SketchUp, Revit) - Strong understanding of architectural design principles - Ability to interpret and implement design instructions accurately - Experience in creating designs for commercial use

I am looking for a skilled CAD/3D model designer to create a smart fishing net prototype for me. The desired size of the prototype is large. Specific features and technology should be incorporated in the design, as I have some ideas in mind. However, I am open to suggestions from the freelancer as well. Please inquire for exact features. The deadline for the project is more than 2 weeks, allowing for ample time to complete the design. Ideal skills and experience for this job include: - Proficiency in CAD and 3D modeling software - Experience in designing prototypes for fishing equipment - Knowledge of smart technology integration in product design - Strong attention to detail and ability to follow specifications accurately.

Stair pan is rusted out. Need an engineer to draw out plan to rebuild the pan of the stairs. The pan is what holds the concrete in the shape and acts as structural support. Give run of 7 steeps.

Dear Freelancer Community, I am looking for a freelancer who can create a 3 view Technical drawing for my automotive rendering project. - The drawings will be based on the specifications that I have provided, although I may not have all the details. - I am open to suggestions and improvements to the design, so I am looking for someone who has expertise in this area. Please see attached an example one of the renderings Skills and experience needed: - Proficiency in creating mechanical drawings - Ability to work with incomplete specifications and provide suggestions - Strong attention to detail - Excellent communication skills to discuss and collaborate on the project

I am looking for a freelancer who is experienced in creating buck files using Solidworks. The purpose of the buck file is for 3D printing. Requirements: - Proficient in Solidworks - Able to work with a detailed design provided by the client Skills and Experience: - Experience in creating buck files for 3D printing - Strong knowledge of Solidworks - Attention to detail in interpreting and implementing the provided design Preferred File Format: - STL

Create a 3D drawing file of a simple vending machine. We will provide pictures and measurements of each part.

Project Description: I am looking for a skilled professional to help me design an automated machine that can disassemble a small product for recycling. The ideal candidate will have experience in machine design and automation. Size of the Product: - The product is small, measuring less than 10 cm in size. Materials to be Disassembled: - The product is made of multiple materials, including plastics and metals. Level of Automation: - The machine should be semi-automated, with some manual elements and automated processes. Skills and Experience: - Experience in machine design and automation - Knowledge of disassembling small products made of multiple materials - Ability to create a semi-automated system with manual and automated elements

I am looking for a product designer who can help me with the design of a 5-liter transparent can. I am open to suggestions and don't have any specific design requirements or preferences. The preferred timeline for this project is 1-2 weeks. Skills and experience required: - Proficiency in SolidWorks or similar software for product design - Experience in industrial design and mechanical design - Knowledge of materials and manufacturing processes for creating transparent containers - Ability to work within tight timelines and deliver high-quality designs