Find Jobs
Hire Freelancers

plc program

$15-25 USD / hour

ปิดแล้ว
โพสต์ มากกว่า 7 ปีที่ผ่านมา

$15-25 USD / hour

need a programmer for allen bradley plc to control motor/pump process.
รหัสโปรเจกต์: 12030696

เกี่ยวกับโปรเจกต์

32 ข้อเสนอ
โปรเจกต์ระยะไกล
ใช้งานอยู่ 7 ปีที่ผ่านมา

กำลังมองหาการสร้างรายได้ใช่ไหม?

ประโยชน์ของการประมูลกับ Freelancer

กำหนดงบประมาณและกรอบเวลาของคุณ
รับเงินจากการงานของคุณ
อธิบายข้อเสนอของคุณในภาพรวม
ลงทะเบียนและเสนอราคาฟรี
32 freelancers are bidding on average $22 USD/ชั่วโมง for this job
รูปอวาตาร์ของผู้ใช้
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Micro-controllers (8051, Arduino, PIC) 4. Power Electronics (PSIM, MATLAB, PSpice) 5. Control of Electric Machine Drives 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the solution of mechanical engineering related projects.
$30 USD ใน 5 วัน
4.8 (136 รีวิว)
6.6
6.6
รูปอวาตาร์ของผู้ใช้
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic and dspic controllers for Power projects, Boot loaders, EEprom. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$24 USD ใน 10 วัน
4.9 (19 รีวิว)
6.2
6.2
รูปอวาตาร์ของผู้ใช้
tell me more,please. .
$24 USD ใน 10 วัน
5.0 (33 รีวิว)
6.0
6.0
รูปอวาตาร์ของผู้ใช้
Hello. I am expert in PLC/SCADA. I have lot of experiences in Roclwell Automation. Could you give me more details about your project? I will review then let you know about Price/Time. I prefer work for fixed price job. Thanks.
$22 USD ใน 10 วัน
5.0 (18 รีวิว)
5.4
5.4
รูปอวาตาร์ของผู้ใช้
Dear friend. I am ready to perform this task. I have extensive knowledge of writing programs for PLC and SCADA. I have excellent knowledge of programming languages such as LD, ST, FBD. My company is the official representative of Schneider Electric in Ukraine. In my portfolio you can see the finished projects developed for various industries automation. I will be glad to help you in solving your problem. If you can send me a problem and I can specify cost and duration of the task. Thank you very much.
$20 USD ใน 25 วัน
5.0 (27 รีวิว)
5.4
5.4
รูปอวาตาร์ของผู้ใช้
Hi, Proficient in TwinCAT/ CodeSys PLC programming – Automation and Controls A competent professional with over 14 years of experience in Embedded Systems Development, Process Automation and Machine Building, entailing Design, Coding, Validation as well as Implementation of firmware and hardware for real-time applications. Experience in industrial software development for semiconductor & solar energy capital equipments, CNC routers for wood working industry and embedded solutions for home appliances & drives. PLC’s: Beckhoff TwinCAT, Safety PLC, Siemens S7 200, Codesys Development Platform. Indusoft Web Studio for SCADA, Custom Build HMI on Visual Studio Understanding of 8 and 16 bit Microcontrollers. Please let me know, If you are interested. Regards, Ratheesh
$16 USD ใน 40 วัน
4.9 (6 รีวิว)
4.0
4.0
รูปอวาตาร์ของผู้ใช้
Hi I am Namrata Sanandiya from India. I have 7 years of experience in PLC, HMI and SCADA programming for Allen Bradley (Rockwell Automation). I have worked with Following Products of Allen Bradley (Rockwell Automation) - PLC (Micro800, MicroLogix, SLC, CompactLogix, ControlLogix) - HMI (Panel View Component, Panel View Plus / Plus 6) - SCADA (Factory Talk View Studio SE, RsView32) - Software (RsLogix500/5000, CCW, Factory talk View Studio SE/ME, IAB tool etc) I am developing programs PLC, HMI and SCADA, Electrical drawings for control panel Also I am supporting customer for Selection of products and Commission Activities. I done many projects in different industries like Oil & Gas, Pharma, Power, Chemical, Food & Beverages, OEM for different sector. If you want I can share my detailed resume. I can work on Allen Bradley PLC efficiently. I can start work immediately I have Rockwell Software installed in my desk. You can contact me on freelancer messenger. Thanks,
$15 USD ใน 10 วัน
5.0 (1 รีวิว)
3.4
3.4
รูปอวาตาร์ของผู้ใช้
Hello! I'm a postgraduate aerospace engineer (MSc degree). I'm experienced with hydraulic, pneumatic, electrical systems and PLCs.
$27 USD ใน 10 วัน
5.0 (1 รีวิว)
2.2
2.2
รูปอวาตาร์ของผู้ใช้
A proposal has not yet been provided
$27 USD ใน 14 วัน
5.0 (1 รีวิว)
2.1
2.1
รูปอวาตาร์ของผู้ใช้
Dear Hiring Manager, First of all thanks for creating an opportunity. Hope you are doing well. I will not propose what the maximum Freelancer do. I dont believe in copy paste Cover letter. I read your project details, if you discuss with me or ask me or talk with me then you can understand i have the better experience the sector you are looking for. It’s true that i am new to Freelancer, before that I was on Other platform with top rated contractor. But it has wind down I close the account there and create the new profile to Freelancer. i have completed this kind of project more than 10 time. So I can assure you that i can complete your task perfectly. For more it will be better if we can discuss or ask me any question if you have. Looking forward from you. Thanks with best regards
$41 USD ใน 10 วัน
5.0 (2 รีวิว)
1.4
1.4
รูปอวาตาร์ของผู้ใช้
I'm systems integrator Rockwell since 2002, with experience in water/wastewater, Oil & gas and food industries.
$22 USD ใน 20 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
Hello, I am a Hardware and Firmware Developer cum Schematic/PCB Designer, having 9+ years of experience. Work with PLC- Siemens, Delta, Allen bradley, Omron (along with simulators of factory automation, home automation) and HMI, SCADA. I can work on this project on fixed price basis also. We can negotiate on project fees. I want to discuss further details.
$15 USD ใน 25 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
PLC Programmer, HMI Application Dovelopment, with professional experience, and had an experience to work on these projects
$22 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
Provide programming for plc for the project and as a gift I will design an hmi program to monitor and control the project
$15 USD ใน 24 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
I used to assemble the electrical panels for electrical motor pumps single phase and three phase, to be considered for installation safety is the number of primary current limiting, cable sizes and size of the pump motor power.
$22 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
A proposal has not yet been provided
$22 USD ใน 24 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
I am an electrical engineer with minor control (PLC-DCS-HMI-microcontrollers-SCADA) and i can help you with that but i need to know the details so that i can see if i can help you or not where i have just 2 years experience and thank you
$22 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
hi, i can do ladder logic for your allen bradly plc using rslogix software it is quite easy thanks regards Usman
$22 USD ใน 12 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
Hi Since you are looking for an unique programming in PLC which I have that makes you more easy to commission and more effective. I done project on Cleaning process in one of the milk industry while I have undergone PLC training. I can work with Allen Bradley(Micro Logix 1500), Siemens(S7-200),Omron(ZEN,CP1E).
$22 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
hey, I have done six month training in PLC and SCADA in allen bradley, siemens, mitsubhishi, abb, schinieder and i know programing very well as i am mechatronics engineer i like robotics and automation very much hope you will accept my proposal. Thank you
$22 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0

เกี่ยวกับลูกค้า

ปักธงของ UNITED STATES
Fremont, United States
5.0
6
ยืนยันวิธีการชำระเงินแล้ว
เป็นสมาชิกตั้งแต่ พ.ย. 10, 2016

การยืนยันลูกค้า

ขอบคุณ! เราได้ส่งลิงก์สำหรับเครดิตฟรีให้คุณทางอีเมลแล้ว
เกิดข้อผิดพลาดขณะส่งอีเมลของคุณ กรุณาลองอีกครั้ง
โลโก้ Freelancer Thailand / ภาษาไทย ช่วยเหลือและสนับสนุน FreelancerประเภทโปรเจคการประกวดFreelancerองค์กรแพ็กเกจสมาชิกโครงการ Freelancer ชั้นแนวหน้าการจัดการโปรเจคงานในพื้นที่Photo Anywhereหน้าจัดแสดงผลงานAPI สำหรับนักพัฒนาได้รับการยืนยันDesktop App เกี่ยวกับเกี่ยวกับเราวิธีใช้งานความปลอดภัยนักลงทุนแผนผังเว็บไซต์เรื่องราวข่าวออกสื่อทีมรางวัลข่าวประชาสัมพันธ์ร่วมงานกับเรา ข้อกำหนดนโยบายความเป็นส่วนตัวข้อกำหนดและเงื่อนไขนโยบายลิขสิทธิ์ข้อพึงปฏิบัติค่าธรรมเนียมและค่าบริการหุ้นส่วนEscrow.comLoadshiftWarrior Forum แอปโลโก้ Apple App Store โลโก้ Google Play
ไม่สามารถคัดลอกไปยังคลิปบอร์ดได้ โปรดลองอีกครั้งหลังปรับเปลี่ยนการอนุญาต
คัดลอกไปยังคลิปบอร์ดแล้ว
ผู้ใช้ที่ลงทะเบียน งานที่มีการโพสต์ทั้งหมด
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
กำลังโหลดตัวอย่าง
ได้รับอนุญาตสำหรับตำแหน่งทางภูมิศาสตร์
เซสชั่นการเข้าสู่ระบบของคุณหมดอายุและคุณได้ออกจากระบบแล้ว กรุณาเข้าสู่ระบบอีกครั้ง