Valley Country Club - Indoor Golf Practice Facility Fit-Out

Looking for a licensed architect (under the Architects Licensure Law - PA Code 63 P.S. 34.1-34.22) to provide floor plan(s) for a new Indoor Golf Practice Facility at the Valley Country Club (Sugarloaf, PA). The drawing must be to scale, include all new wall types, locations for new electrical/ A/V receptacles, locations for new HVAC mini-split HVAC system(s) and address all state, local & national codes regarding ADA compliance, life safety & egress as required to obtain a commercial building permit in Sugarloaf Township, PA. Structural, HVAC & electrical engineering not required. Looking for architectural documents/ drawings only. The existing building is face brick/ stucco facade with CMU back-up, conventional wood trusses, un-insulated with asphalt shingle roofing. See attached photos of existing building. There is approximately 1000SF of shell space that has been created inside the existing building - approximately 19' x 53'. The height from the concrete (slab-on-grade) to the bottom chord of the wood trusses is +/- 10'-4". See attached existing conditions and conceptual floor plan drawings (in PDF). The basis of design for the new Indoor Golf Practice Facility are as follows: - Ceiling: Suspended acoustical/ "Drop" ceiling system - Minimum ceiling height 10'-0" - Flooring: Luxury Vinyl Plank (direct glue down with pressure sensitive adhesive) - Walls: Furring of existing exterior walls and new interior wall will require insulation) - Golf Hitting Mats: Fiberbuilt Combo Putting/ Hitting System (10'x10') Site visit not required. Additional photos, dimensions, etc. can be provided upon request.