Find Jobs
Hire Freelancers

PCB layout and routing

$30-250 USD

ที่ทำเสร็จแล้ว
โพสต์ มากกว่า 5 ปีที่ผ่านมา

$30-250 USD

ชำระเงินเมื่อส่งงาน
I am designing a microcontroller + sensors + radio (868MHz) board and want you to do the PCB layout and routing. I have done the schematics. - PCB layout - routing - generate all files needed to order the PCB
รหัสโปรเจกต์: 17840018

เกี่ยวกับโปรเจกต์

24 ข้อเสนอ
โปรเจกต์ระยะไกล
ใช้งานอยู่ 6 ปีที่ผ่านมา

กำลังมองหาการสร้างรายได้ใช่ไหม?

ประโยชน์ของการประมูลกับ Freelancer

กำหนดงบประมาณและกรอบเวลาของคุณ
รับเงินจากการงานของคุณ
อธิบายข้อเสนอของคุณในภาพรวม
ลงทะเบียนและเสนอราคาฟรี
หมอบหมายให้:
รูปอวาตาร์ของผู้ใช้
Hello there, I have read your project description and I can do that for you. Will you go with pcb antenna for your project, ceramic or with [login to view URL] connector? Anyhow I can deliver whatever you need. I invite you to give me a ping in chat so we could discuss more about it. Also feel free to check my profile and see my portfolio. I usually fork with KiCad and Eagle but I'm familiar with DesignSpark also. Thanks, regards.
$180 USD ใน 5 วัน
5.0 (59 รีวิว)
6.5
6.5
24 freelancers are bidding on average $128 USD for this job
รูปอวาตาร์ของผู้ใช้
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Circuit Design, Electrical Engineering, Electronics, PCB Layout, I have made PCB projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
$200 USD ใน 3 วัน
4.9 (19 รีวิว)
6.6
6.6
รูปอวาตาร์ของผู้ใช้
Hello I have seven years of professional PCB designing experience , i want to do this project for you , I have few questions, 1: In which software you have designed schematics? Received answer of Design spark, I will show you a sample of work in design spark while interview 2: Timeline of the project.? 3:PCB library is done ? Regards Engineer humza
$250 USD ใน 7 วัน
4.9 (68 รีวิว)
6.3
6.3
รูปอวาตาร์ของผู้ใช้
I have long experience with PCB design. I have worked with low-speed , high-speed and power boards. I use Altium Designer and Eagle, and I deliver neat layout that conforms to your dimension constraints and the manufacturing constraints. I can recommend a PCB manufacturer and also you can go through my portfolio to see samples of my previous work. More to be discussed once you contact me . BR, M.T.
$35 USD ใน 3 วัน
4.8 (37 รีวิว)
6.0
6.0
รูปอวาตาร์ของผู้ใช้
Profile : ---------- over 14 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report
$250 USD ใน 3 วัน
5.0 (35 รีวิว)
5.9
5.9
รูปอวาตาร์ของผู้ใช้
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 7 years in arduino and electronics i can start immediately
$50 USD ใน 2 วัน
5.0 (31 รีวิว)
5.5
5.5
รูปอวาตาร์ของผู้ใช้
Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We specialize in developing Embed systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP430) MCPUs and peripheries. For our mobile devices use CC2540/41 and nRF51/52xxx BLEs. We realize projects with requirements similar to yours. Our tools: Altium Designer,Proteus 8.7 If we receive more information about your project, we will give you a real cost and time to implement your project. We based in Europe, not customs problems for delivery models and samples for testing Best Valeri T
$155 USD ใน 7 วัน
4.7 (11 รีวิว)
5.7
5.7
รูปอวาตาร์ของผู้ใช้
Hello sir. I am an electrical engineer best in pcb design from the schematics in software liike eagle cad, altium, kicad and fritzing. I can help you with designing the pcb and get you the bill of materials for it. Thanks.
$100 USD ใน 3 วัน
4.8 (26 รีวิว)
4.5
4.5
รูปอวาตาร์ของผู้ใช้
Master in Engineering, Electrical and Electronic Engineer, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
$30 USD ใน 3 วัน
4.7 (12 รีวิว)
4.3
4.3
รูปอวาตาร์ของผู้ใช้
However the price will depend on complexity However the price will depend on complexity However the price will depend on complexity
$166 USD ใน 1 วัน
5.0 (7 รีวิว)
4.1
4.1
รูปอวาตาร์ของผู้ใช้
Hello Sir, I have 4 years experience in PCB designing in EAGLE( single multilayer and flex). following are some examples of my work 1. ESP12E wifi + relay board + humidity&temp sensor Smart module 2. ESP12S wifi + relay board home automation board. 3. ESP12E wifi + RC522 RFID + BUCk converter module. 4. atmega328au + hm11(BLE)+ relays car actuator module. 5. atmega328au + nrf24l01 + relays smart switch module. 6. atmega328au + mpr121 capacitive touch smart remote. 7. amega328au + LCD display + hc06(later hm10) + amplifier + strain gauge water mapping module. 8. atmega328au + hm10(BLE) + gyroscope + reed sensor + battery charger smart skateboard module 9. Arduino Uno clone. I will provide you all necessary files ( gerber, smd-coordinate, BOM, Eagle(.brd& .sch) ). please, see my portfolio for more sample of my work. or initiate chat more detail discussion on your project. thanks.
$100 USD ใน 3 วัน
4.9 (17 รีวิว)
4.1
4.1
รูปอวาตาร์ของผู้ใช้
Experience in several PCB design projects. 1 or 2 layers. Can redesign layout any times you need until you get the result you want
$90 USD ใน 10 วัน
5.0 (6 รีวิว)
3.6
3.6
รูปอวาตาร์ของผู้ใช้
Hi! I have experience in PCB designing with Altium Designer software. I've designed PCB's for microcontrollers and high frequency applications and I think I can work well in your project.
$133 USD ใน 3 วัน
5.0 (4 รีวิว)
3.4
3.4
รูปอวาตาร์ของผู้ใช้
Hello Sir/Madam, I would like to apply for your project. I am an EE based in Bulgaria with several years of experience in schematics development and pcb design. I am using AD 17, but i could work on any CAD system (I've worked with Designspark PCB for two year) as per your requirements. You can check my portfolio with some of my designs. My latest ones, not included in portfolio include USB Type C hubs, Ethernet to Type C/USB 3.1 A bridge, PoE modules, etc. I am awaiting your answer to my proposal, Dimitar Mirchev
$155 USD ใน 3 วัน
5.0 (2 รีวิว)
1.9
1.9
รูปอวาตาร์ของผู้ใช้
Hi, I have more than 15 years of hardware design experience covering both embedded, RF and PCB design. As you have a schematic in DesignSpark, its a lot easier as I use the same and makes the layout is much easier with standard library parts. I can also point you to the right PCB house for a cheap and quick manufacturing as I have been in this business for a long time. Happy to discuss the layout and sensor placement for a realistic product design. Best regards, Nakul
$120 USD ใน 3 วัน
4.0 (1 รีวิว)
0.8
0.8
รูปอวาตาร์ของผู้ใช้
Electronical engineer with lot of knowledge in PCB design. I'm fast and efficient doing electronical tasks and open to all possible modifications in the project.
$111 USD ใน 3 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
What is the format files? I can develop this project in 5 days, I work as PCB design a 10 years. Thank you, Best regards
$155 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
If You look at my profile, You can see that I have a vast and diverse knowledge: from electronics, over web to testing. I believe I am the perfect person for the job. If You have any questions, please do not hesitate to ask them. Looking forward to the near future cooperation. Wish You all the best! Regards, Dragan
$113 USD ใน 3 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
we have experienced people in PCB designing and providing PCB design services with good quality
$111 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
Hi, We are a team of professionals and having skills in Electronics circuit designs, RF , Embedded system and PCB designs. We can provide you the best PCB designs and also have capabilities to help you in circuit designs. We worked with Eagle and KiCad platforms. We are new in freelancer and so we request you to please consider our proposal too.
$138 USD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0

เกี่ยวกับลูกค้า

ปักธงของ SWEDEN
Askim, Sweden
5.0
2
ยืนยันวิธีการชำระเงินแล้ว
เป็นสมาชิกตั้งแต่ ก.ย. 24, 2018

การยืนยันลูกค้า

ขอบคุณ! เราได้ส่งลิงก์สำหรับเครดิตฟรีให้คุณทางอีเมลแล้ว
เกิดข้อผิดพลาดขณะส่งอีเมลของคุณ กรุณาลองอีกครั้ง
โลโก้ Freelancer Thailand / ภาษาไทย ช่วยเหลือและสนับสนุน FreelancerประเภทโปรเจคการประกวดFreelancerองค์กรแพ็กเกจสมาชิกโครงการ Freelancer ชั้นแนวหน้าการจัดการโปรเจคงานในพื้นที่Photo Anywhereหน้าจัดแสดงผลงานAPI สำหรับนักพัฒนาได้รับการยืนยันDesktop App เกี่ยวกับเกี่ยวกับเราวิธีใช้งานความปลอดภัยนักลงทุนแผนผังเว็บไซต์เรื่องราวข่าวออกสื่อทีมรางวัลข่าวประชาสัมพันธ์ร่วมงานกับเรา ข้อกำหนดนโยบายความเป็นส่วนตัวข้อกำหนดและเงื่อนไขนโยบายลิขสิทธิ์ข้อพึงปฏิบัติค่าธรรมเนียมและค่าบริการหุ้นส่วนEscrow.comLoadshiftWarrior Forum แอปโลโก้ Apple App Store โลโก้ Google Play
ไม่สามารถคัดลอกไปยังคลิปบอร์ดได้ โปรดลองอีกครั้งหลังปรับเปลี่ยนการอนุญาต
คัดลอกไปยังคลิปบอร์ดแล้ว
ผู้ใช้ที่ลงทะเบียน งานที่มีการโพสต์ทั้งหมด
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
กำลังโหลดตัวอย่าง
ได้รับอนุญาตสำหรับตำแหน่งทางภูมิศาสตร์
เซสชั่นการเข้าสู่ระบบของคุณหมดอายุและคุณได้ออกจากระบบแล้ว กรุณาเข้าสู่ระบบอีกครั้ง