Find Jobs
Hire Freelancers

Photovoltaic panels produce DC current that heats a typical water heater

$250-750 CAD

ปิดแล้ว
โพสต์ ประมาณ 6 ปีที่ผ่านมา

$250-750 CAD

ชำระเงินเมื่อส่งงาน
Simply put, the goal is to heat a standard hot water tank with solar PV. To be able to help me you'll need to understand (among other things): DC power and loads, heater resistances and solar PV optimization (resistance as it relates to fluctuating PV voltage), and Tigo DC optimizers. Please note this project v1.0 is already working and has been working for over a year, I just know it can work better. This next phase involves increasing the performance as well as increasing the safety/control aspect of it (ie: it currently has no means to automagically shut itself off). The 6-panel array produces 1,260W @STC (see attached PV spec sheet for Vmp Imp and be sure to refer to specs for the 210W model). Each panel in the array has Tigo Optimizers attached to it. Under normal conditions on an average day I'm seeing power production anywhere from 500W to 1kW with sun, depending on the season and the weather conditions of course. Each PV panel plugs into it's own Tigo optimizer (so there are 6, one for each panel), and then all those optimizers are wired in series and that series terminates in a weather tight box (2 wires, one positive and one negative) where it connects to buried TECK90 #10 AWG cable (conductors are stranded copper, TECK is rated for 600V). This underground cable runs approx 150 ft back to the house. In the house it terminates inside a large metal box (nice and big, was once used to hold a simple 6"x6" PCB MOSFET setup which I can tell you more about) where it connects to #14 AWG (solid copper conductors). That #14 travels less than 8 ft with the two wires terminating onto the bottom heating element of a standard run-of-the-mill north american hot water heater. The water heater thermostat has been bypassed since they only work with AC, and this is DC. This tank is a pre-heater and is one of two heating tanks in the house, the second and final tank is a typical gas heated tank. There are 4 plumbing valves that allow me to isolate one of the tanks for the house hot water supply. The Tigo aspect of the system is of great assistance because not only does it maximize each PV panel, it also provides me with technical data and analysis tools via their monitoring portal website. I can give you access to this no problem, you will see data (power, volts, current) for both live data as well as the past year of graphed data. My goal is to study the performance shortcomings or "blips" that I see on the Tigo portal. Secondly, to increase the safety/controlling aspect of it. The "blips" are either 1) not real, or 2) are how the Tigo's respond when connected directly to a DC load. I notice on the Tigo portal that although it is working, random panels seems to fall out and lose 20% power and I wonder if I'm missing something in my design (a resistor, a capacitor?) to smooth things out. Anyways, diagnosis is required. And less important for this phase of the project, the safety aspect -- the water heater has a pressure release valve on it so technically there is some protection if it boils, but I'd like you to suggest some kind of component that's not too expensive to help with this. Basically to shut things down if the tank gets hot enough. Tigo already has a way for the MMU to communicate with the optimizers to tell them to shut themselves off, but at the moment it is human initiated as the only way to do it is to press the red "PV-SAFE OFF" button on the MMU. Any suggestions on this are appreciated. Or maybe a DC relay is the way to go, but they're expensive. In conclusion it is working and on good days the 60 gallon tank will go from cold to over 100 deg F, so the proof of concept is done and it works. I'm asking for your help to make it better. Your experience and knowledge of electrical theory and components will improve this and help me get to the next level. No tinfoil hats allowed LOL.
รหัสโปรเจกต์: 16057312

เกี่ยวกับโปรเจกต์

6 ข้อเสนอ
ใช้งานอยู่ 6 ปีที่ผ่านมา
ที่ตั้ง: Toronto, Canada

กำลังมองหาการสร้างรายได้ใช่ไหม?

ประโยชน์ของการประมูลกับ Freelancer

กำหนดงบประมาณและกรอบเวลาของคุณ
รับเงินจากการงานของคุณ
อธิบายข้อเสนอของคุณในภาพรวม
ลงทะเบียนและเสนอราคาฟรี
6 freelancers are bidding on average $366 CAD for this job
รูปอวาตาร์ของผู้ใช้
A proposal has not yet been provided
$266 CAD ใน 5 วัน
4.8 (8 รีวิว)
2.9
2.9
รูปอวาตาร์ของผู้ใช้
dear technical man from Canada, you have given much of the information about your project. From my experience with solar panels the thing that causes deviations is shadow or some pannel issue if there is. But if that not the case.... then clouds are there... safety/controlling can be increased by using microcontrollers. I think to analyze this type of project we have to look into the data that tigo portal is giving us and comparing these results with the actual measurements from solar panels. That I could understand from your shared data. I have worked with these solar panels. I designed a solar car in my undergraduate and it was a fun. Will love to work on this project because everything is set we just have to improve the results. ( if greater time is provided we can improve it much better).
$255 CAD ใน 10 วัน
5.0 (2 รีวิว)
2.8
2.8
รูปอวาตาร์ของผู้ใช้
Thanks for inviting me. yes Sir i have experience in Photo-voltaic panels produce DC current that heats a typical water heater come to chat to discuss more waiting for a reply from you thanks
$250 CAD ใน 5 วัน
5.0 (3 รีวิว)
2.2
2.2
รูปอวาตาร์ของผู้ใช้
My willingness to cooperate and being loyal to the management, keeping in mind the proficiency and competence standards is unwavering. Relevant Skills and Experience I am well versed with Mathematics, Statistics and all business papers be it Accounting, Finance or general business. Proposed Milestones $555 CAD - Final Thanks a lot as I look forward to helping you
$555 CAD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0
รูปอวาตาร์ของผู้ใช้
I have design and implementing experience of pv solar station. I am an engineer with MS degree in both Mechanical and Electrical Engineering. I live in North York, ON.
$622 CAD ใน 10 วัน
0.0 (0 รีวิว)
0.0
0.0

เกี่ยวกับลูกค้า

ปักธงของ CANADA
Toronto, Canada
0.0
0
เป็นสมาชิกตั้งแต่ ม.ค. 12, 2018

การยืนยันลูกค้า

ขอบคุณ! เราได้ส่งลิงก์สำหรับเครดิตฟรีให้คุณทางอีเมลแล้ว
เกิดข้อผิดพลาดขณะส่งอีเมลของคุณ กรุณาลองอีกครั้ง
โลโก้ Freelancer Thailand / ภาษาไทย ช่วยเหลือและสนับสนุน FreelancerประเภทโปรเจคการประกวดFreelancerองค์กรแพ็กเกจสมาชิกโครงการ Freelancer ชั้นแนวหน้าการจัดการโปรเจคงานในพื้นที่Photo Anywhereหน้าจัดแสดงผลงานAPI สำหรับนักพัฒนาได้รับการยืนยันDesktop App เกี่ยวกับเกี่ยวกับเราวิธีใช้งานความปลอดภัยนักลงทุนแผนผังเว็บไซต์เรื่องราวข่าวออกสื่อทีมรางวัลข่าวประชาสัมพันธ์ร่วมงานกับเรา ข้อกำหนดนโยบายความเป็นส่วนตัวข้อกำหนดและเงื่อนไขนโยบายลิขสิทธิ์ข้อพึงปฏิบัติค่าธรรมเนียมและค่าบริการหุ้นส่วนEscrow.comLoadshiftWarrior Forum แอปโลโก้ Apple App Store โลโก้ Google Play
ไม่สามารถคัดลอกไปยังคลิปบอร์ดได้ โปรดลองอีกครั้งหลังปรับเปลี่ยนการอนุญาต
คัดลอกไปยังคลิปบอร์ดแล้ว
ผู้ใช้ที่ลงทะเบียน งานที่มีการโพสต์ทั้งหมด
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
กำลังโหลดตัวอย่าง
ได้รับอนุญาตสำหรับตำแหน่งทางภูมิศาสตร์
เซสชั่นการเข้าสู่ระบบของคุณหมดอายุและคุณได้ออกจากระบบแล้ว กรุณาเข้าสู่ระบบอีกครั้ง