RS485 Project to control stepper & servo motor

€30-250 EUR

ถูกยกเลิก

โพสต์

มากกว่า 5 ปีที่ผ่านมา

€30-250 EUR

ชำระเงินเมื่อส่งงาน

We have the following system: 1) PCBA with Atmega2560 2) Servo Motor with driver (3Nos) 3) Stepper Motor with driver (7Nos) 4) M007 Touchscreen (HMI) Software for HMI: [login to view URL]!AouhlXXdprIt6x5TNRusQYstzHWT. (Use the latest version) Please find the data sheet of all attached along with the schematic of the PCBA. We need to create a simple program to control all stepper and servo motors. Stepper MOTOR 1: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 2: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 3: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 4: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 5: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 6: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Stepper MOTOR 7: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Servo MOTOR 1: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Servo MOTOR 2: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> Servo MOTOR 3: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF">

รหัสโปรเจกต์: 17578431

เกี่ยวกับโปรเจกต์

14 ข้อเสนอ

โปรเจกต์ระยะไกล

ใช้งานอยู่ 6 ปีที่ผ่านมา

กำลังมองหาการสร้างรายได้ใช่ไหม?

ที่อยู่อีเมล

ประโยชน์ของการประมูลกับ Freelancer

กำหนดงบประมาณและกรอบเวลาของคุณ

รับเงินจากการงานของคุณ

อธิบายข้อเสนอของคุณในภาพรวม

ลงทะเบียนและเสนอราคาฟรี

14 ฟรีแลนซ์กำลังเสนอราคาโดยเฉลี่ย €228 EUR สำหรับงานนี้

@sagradoamicus

HI I am experienced electronics engineer with more than 8 years of experience. I have designed a number of systems before. Please review my profile to see the feedback from my previous employers I am waiting for your reply to start Regards

€500 EUR ใน 10 วัน

4.9

(239 รีวิว)

7.9

@MuhammadUzair16

I am an electronic engineer with more than 10 years of experience. I have extensive experience working with stepper motors and RS485. I can work on this project and provide you with the required programs and help you set it and test it up. please contact me to discuss details

€250 EUR ใน 7 วัน

4.9

(16 รีวิว)

5.7

@SPARKtechBD

Best knowledge on open hardware Arduino and Raspberry Pi to control stepper motor or servo motor. Also I have built IoT device to send sensor data to the Web Server. 15+ years of experience on Computer Language and Digital Electronics.

€500 EUR ใน 15 วัน

5.0

(8 รีวิว)

5.6

@hayat38402

......................................................................................................................................................................................................................................................................................................................

€50 EUR ใน 3 วัน

4.7

(24 รีวิว)

5.3

@Manoj3050

Hi, I'm an electronic engineer with more than 5 years of experience in embedded systems development. I've decided to apply for the project after reading through the specification and reading the attachments. I have done several other projects uses HMI to control and provide status monitors. I went through the software interface provided and I can design a good interface for the given functions and decode inputs for Atmega 2560 accordingly to provide correct inputs to servo drivers. I believe you have correctly functioning PCB is available and I can assume functionality is correct for programming. I would like to know whcih platform you need to program on. Looking forward to hear from you. Thank you Anusha

€444 EUR ใน 7 วัน

4.9

(26 รีวิว)

4.9

@ganapathi92

Hi, I think you want to build a custom PLC with WiFi capabilities and HMI Support. I Have experience in Atmega2560 , written program in C,C++ and ASM I can write event based, non blocking code with future extension capabilities I'll develop the code with Modbus interface, HMI Interface, WiFi Interface and GPIO Interface for 150 Euros +50 Euros (for GUI application for windows) if you need only Servo and stepper interface then its only 70 Euros I dont understand this command Stepper MOTOR 1: <BUTTON "Left Turn"> <"BUTTON "Right Turn"> <Button "ON"> <Button "OFF"> everything has same contact me if you want

€150 EUR ใน 5 วัน

4.9

(26 รีวิว)

4.4

@zainpacc

Expertise in Atmega microcontrollers with a substantial background in motor interfacing. I have completed various projects related to this field and can provide you your complete task in decided time frame with quality work. We can discuss further details in the message box Regards

€90 EUR ใน 5 วัน

5.0

(10 รีวิว)

3.5

@kahan1994

HI, i am kahan. I am embedded engineer and have much experienced in hardware and software side. Waiting for further discussion. Thank you .

€200 EUR ใน 8 วัน

5.0

(7 รีวิว)

3.0

@Syed23365

i am electrical engineer i know all about PCB and i can complete the desired work before the time limit nd minimum of your buget thanks

€166 EUR ใน 1 วัน

5.0

(3 รีวิว)

2.2

@Dhaker258

hello sir, i can help you in this project am ready for this job am a mechatronics enginner and an arduino former

€200 EUR ใน 3 วัน

0.0

(0 รีวิว)

0.0

@RafaatAbdElhamed

I am very enthusiast to work in this project , I will give you all my time and my experience in this field . You can see my profile ,I have been uploaded some circuit design. I will give you some samples for your design(test)before start in main project,time plan , enough proposal about project

€34 EUR ใน 5 วัน