Utility to build a mold from an STL file -- 2

ปิด โพสต์แล้ว 5 ปีที่ผ่านมา ชำระเงินเมื่อจัดส่ง
ปิด ชำระเงินเมื่อจัดส่ง

I am working with STL files for 3D printing. The STL files normally contain the hull of a shape with no thickness. Imagine the shapes to be similar to a cup that you drink from. With this as an input, the utility should do the following: 1. Calculate the volume of the shape. 2. Extend the top of the shape an additional 4 mm (just a plain extrusion). 3. Project an additional surface 0.8 mm outwards and close the shape at the top (just flat, nothing fancy). This is to create a mold that will have 2-part rubber poured into it. 4. Using a specific density (1.06 g/mm3) of liquid filled to the initial height (before the 4 mm extension), calculate and create supports for the mold such that it can withstand a 10 degree tipping without falling over. There should be 4 supports, projected from the calculated center of gravity, 8 mm x 0.8 mm, going up from the 'floor' at 55 degrees, with very small feet around the supports. 5. A small notch (running most of the length of one side) has to created on a specific side of the mold, which brings the thickness down to approximately 0.4 mm. 6. The output file must be a valid STL file, and must run as a command-line utility on linux. 7. Java is preferred, but if you have another suggestion, please mention it with your bid.

การสร้างแบบจำลอง 3D Java

หมายเลขโปรเจค: #18921140

เกี่ยวกับโปรเจกต์

7 ข้อเสนอ โปรเจกต์ระยะไกล ใช้งาน %project.latestActivity_relativeTime|แทนที่%

freelancer 7 คน กำลังเสนอราคาในงานนี้ โดยมีราคาเฉลี่ยอยู่ที่ €177

thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic เพิ่มเติม

€250 EUR ใน 10 วัน
(18 รีวิว)
5.1
xabhix

Hi there, I am an experienced mechanical design engineer in the design and development of a product. My skills are CAD/CAM, product design, 3D design, 3D modeling, making CAD model from photos, etc. in CATIA, Solidwor เพิ่มเติม

€135 EUR ใน 3 วัน
(25 รีวิว)
5.1
chriseng1

Hello I would like to do your project. please let me know more details and information to start working on your project.

€30 EUR ใน 7 วัน
(17 รีวิว)
4.4
vishalsha95570

We are from DL&T. If you want to implement your idea, then we are always ready for you being a professional developer means to understand all the requirements of the clients, and find the best way to implement it with เพิ่มเติม

€155 EUR ใน 3 วัน
(8 รีวิว)
3.6
pankajauengg

Hello! I can complete your project work with instructions as provided by you. Following will be my responsibility:- 1. Calculation of volume of shape. 2. Making geometrical changes like Extending the top of the sha เพิ่มเติม

€333 EUR ใน 10 วัน
(3 รีวิว)
2.1