Heat Load Calculations

I require a heat load calculation (heat loss and heat gain) for the attached drawings. Notes from the spec: - No allowance shall be made for the heat gain from lighting, occupants and equipment within the heating load calculations. - No allowance shall be made for internal blinds within the cooling load calculations. - The air infiltration rate used in the heat loss and heat gain calculations shall be based on the entire building volume, i.e. to include raised floor and suspended ceiling voids. - The heat gain and heat loss calculations shall be completed using CIBSE AM11 software based on design criteria. Design Cooling Loads: - Office occupancy level: 1 person per 8m2 net office area. - Small power: 25W/m2 for office area terminal units. - Small power: 10W/m2 additional in cooling plant and risers. - Lighting: 10W/m2 office areas - Occupants: Sensible 90W per person. - Occupants: Latent 50W per person. - Infiltration: Summer 0.50 air changes per hour. - Infiltration: Winter 1.0 air changes per hour. - Infiltration: Reception 2.0 air changes per hour. Fresh Air Rates: - Office occupancy level: 1 person per 8m2 net office area - Office fresh air supply rate: 1.5 litres/s per m2 + 10% for central plant - Toilet, Shower & Cleaner: 10 air changes per hour supply and extract or 25l/s per cubicle, whichever is greater. - Changing Room: 15 air changes per hour supply and extract. - Drying Room: 20 air changes per hour supply and extract. Link to building overhead view: [login to view URL] Please note: any disclosure, reproduction, copying, distribution or other dissemination or use of documents shared with this job is strictly prohibited.