3D Product Modeling
- สถานะ: Closed
- รางวัล: R550
- ผลงานที่ได้รับ: 53
- ผู้ชนะ: vitaliyukrainsky
รายละเอียดการประกวด
Product Bottle.
Attached:
- Attachment 1 - example attached. (The actual bottle looks the same ate the example.)
- Attachment 2 - The label that needs to be around the bottle. Label Size must be 21,5cm (length) x 8,4cm (height) and must be in the same position as the example in attachment 1.
- Attachment 3 - Use the Top Part of this Creatine Label for the top part of the bottles lid wrap. The Top Wrap Label that needs to be around the top. (see example attachment no:1)
- Attachment 4 - 1st example of the final render angle that the bottle must be
- Attachment 5 - 2nd example of the final render angle that the bottle must be
You will do 2 final renders of the highest quality with slight reflection and shadow on both angels as well as similar shine as attachment 4. The blue color should also match attachment 4. This is our other product in the range. (See angels from attachment 4 + attachment 5)
You are free to do more angels as long as we get the required 2 angels.
- Attachment 7 - A picture of the actual bottle.
ทักษะแนะนำ
คำติชมจากผู้ว่าจ้าง
“He really delivered more than what we expected and were more than willing to make changes where needed. We have had a very positive experience with this freelancer and would for sure recommend him.”
nutrinoxlabs, South Africa.
กระดานประกาศ
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Please note that final exports and renders must be on a transparent background.
- 8 ปี ที่ผ่านมา
-
vitaliyukrainsky
- 8 ปี ที่ผ่านมา
I left a message for you in the comments to my work. Please read.
Thank you.- 8 ปี ที่ผ่านมา
-
pestariiio
- 8 ปี ที่ผ่านมา
Give me your address, I'll send you a ruler. Lol ))
- 8 ปี ที่ผ่านมา
-
Zoland
- 8 ปี ที่ผ่านมา
lol
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
I have uploaded a pick of our other products. (Attachment 8) Please make sure you angle, reflections and lighting matches. The NephrineX product is literally half the size of the Whey Protein bottle that is in front (Attachment 8)
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
We will announce the final choice soon. Again thank you for all your entries. You all did very well. We are very impressed with the over all quality of products you all produced!
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Glossy but not over glossy.
- 8 ปี ที่ผ่านมา
-
vitaliyukrainsky
- 8 ปี ที่ผ่านมา
What material of white plastic has to be? Glossy or not?
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Thank you for all your entries and hard work. Despite the fact that we also didn't get final sizes you all did very well. And some did EXTREMELY WELL even though they didn't have the 100% correct sizes. They looked at the actual bottle attachment 7 and made an incredible interpretation. So again than you for the great work. We will award the project soon.
- 8 ปี ที่ผ่านมา
-
pestariiio
- 8 ปี ที่ผ่านมา
you are forced to work without specifying all sizes. All spend time in vain.
- 8 ปี ที่ผ่านมา
-
rafa318
- 8 ปี ที่ผ่านมา
please, check my jobs, #31
- 8 ปี ที่ผ่านมา
-
jowain
- 8 ปี ที่ผ่านมา
is it possible to get the diameter and height of the bottle cap, to make the design more accurate ?
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Thank you for all your great work. And thank you for being so willing to make changes. We will add the exact diameter, height of the bottle and cap. please give us a few moments to get it from the factory. We will add it in the brief as well as on the Clarifications board.
- 8 ปี ที่ผ่านมา
-
jowain
- 8 ปี ที่ผ่านมา
oke thank you
- 8 ปี ที่ผ่านมา
-
Zoland
- 8 ปี ที่ผ่านมา
You know, i'ts faster to make creatine bottle also with the same lighting, reflection, shadows and right proportions and dimensions. No bottle dimensions - no happy customer =)
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Thank you for all your great work. And thank you for being so willing to make changes. We will add the exact diameter, height of the bottle and cap. please give us a few moments to get it from the factory. We will add it in the brief as well as on the Clarifications board.
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Thank you for all your great work. And thank you for being so willing to make changes. We will add the exact diameter, height of the bottle and cap. please give us a few moments to get it from the factory. We will add it in the brief as well as on the Clarifications board.
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Please accept r biggest apologies. We have accidentally attached the old version of the label. There was a spelling mistake on the name of the product. Please see the correct label replacing the previous one as Attachment 3. Thank you for all your GREAT work so far!
- 8 ปี ที่ผ่านมา
-
jowain
- 8 ปี ที่ผ่านมา
is the color of the bottle black or white?
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
white
- 8 ปี ที่ผ่านมา
-
Zoland
- 8 ปี ที่ผ่านมา
final render resolution?
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Must be able to print on big posters and walls.
- 8 ปี ที่ผ่านมา
-
pestariiio
- 8 ปี ที่ผ่านมา
cap should be in a blue film?
- 8 ปี ที่ผ่านมา
ดูอีก 1 ข้อความ-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
It must look like the strip at the top of the Creatine Label.
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Attachment 4 - Look at the top blue strip
- 8 ปี ที่ผ่านมา
-
pestariiio
- 8 ปี ที่ผ่านมา
what size bottle?
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
it's a 400ml bottle. The label's height is 8,4cm, circumference is 21,5cm. I will attached a pick of the actual bottle
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
attachement 7
- 8 ปี ที่ผ่านมา
-
Unclereggae
- 8 ปี ที่ผ่านมา
I'm also working on this :)
- 8 ปี ที่ผ่านมา
-
ผู้จัดการประกวด - 8 ปี ที่ผ่านมา
Please let us know if you have any questions.
- 8 ปี ที่ผ่านมา
-
vitaliyukrainsky
- 8 ปี ที่ผ่านมา
Ok! Working on...
- 8 ปี ที่ผ่านมา
-
vitaliyukrainsky
- 8 ปี ที่ผ่านมา
- Attachment 1, - Attachment 2 - is missing???
- 8 ปี ที่ผ่านมา
-
Imagepresslib3
- 8 ปี ที่ผ่านมา
I am very proficient at bottle design. If you want, I can show my previous work result.
- 8 ปี ที่ผ่านมา
-
Imagepresslib3
- 8 ปี ที่ผ่านมา
Dear
- 8 ปี ที่ผ่านมา
วิธีเริ่มต้นจัดการประกวด
-
จัดการประกวดของคุณ รวดเร็วและง่ายดาย
-
รอรับผลงานจำนวนมหาศาล จากทั่วโลก
-
มอบรางวัลให้แก่ผลงานที่ดีที่สุด ดาวน์โหลดไฟล์ - ง่ายดาย!