วิศวกรรมสถาปัตยกรรม Jobs

I need a structural engineer who already holds an active Arizona licence and can place an official seal on the work. The project is new-build residential: a 30' × 64' single-story home (about 1,200 sq ft) plus a 24' × 25' two-car garage. Architectural plans are still being finalised, but I will forward preliminary PDFs/CAD files as soon as they are cleaned up. Your brief is straightforward but critical for permitting: • Provide complete load calculations for two heavy wood beams (6 × 10 and 6 × 12) that frame the entry porch. • Prepare a full braced-wall plan for the house and garage, showing panel locations, lengths, hold-downs, anchor schedules and any uplift or shear requirements in line with the current IRC/IBC adopted by Arizon...

I'm seeking an experienced AutoCAD draftsman to create detailed joinery drawings with annotations from scratch. Key Requirements: - New drawings needed - High level of detail required - Annotations for clarity and understanding Ideal Skills and Experience: - joinery manufacture - Proficiency in AutoCAD - Strong attention to detail - Ability to create clear, comprehensive annotations - previous experience

I need a complete braced-wall plan prepared for a single-story residence that will be submitted to Yavapai County, Arizona. All design, notes, and detailing must conform to IRC 2018 Section R602.10 and reflect the local design parameters: 105 mph wind speed, Exposure B, 8 ft wall height with an 8 ft ceiling, roof peak at 15 ft 6 in, and continuous CS-WSP sheathing wrapping the entire building. Exterior walls are wood-framed. I already have the full floor plan in digital format and will forward the DWG and PDF files as soon as we start. Your task is to overlay the required braced-wall lines, compute the necessary lengths, show required panel locations, note any hold-downs or strap requirements, and provide fastening schedules that satisfy Section R602.10 for the county reviewer. Deliverab...

I’m preparing a permit package for a new foam-pit installation in California and need a complete, submission-ready drawing set delivered as a single, well-organized PDF. Every sheet must comply with the California Building Code and the updated Title 24 standards that take effect 1 January 2026. The set has to include: • Floor plan clearly referencing the applicable CBC and Title 24 sections right on the sheet • Full construction plans with dimensions, structural framing, pit details, finishes, safety barriers, and any required mechanical or ventilation notes • Sheet index, code summary, general notes, and all details the local jurisdiction typically expects for this scope Please format the file so it can be printed at 24 × 36 in without loss of resolution. ...

I need a full set of architectural and structural drawings for a traditional-style, detached three-car garage to be built in Rumford, Rhode Island. The footprint is fixed at 36' × 28' and I would like a truss roof line that supports integrated storage: dedicated wall-mounted storage on the main level and additional overhead space on a partial loft. All drawings must be prepared to the standard required for submission to the local building department, complying with the current Rhode Island State Building Code and any Rumford zoning requirements. Digital (PDF) files are essential; a stamped hard-copy set may also be requested once the design is finalized. Deliverables • Site plan showing setback compliance • Foundation, floor, and framing plans with structural ...

I'm seeking a qualified engineer to create scaled site plans for a commercial property, specifically for a drive-thru coffee trailer. The plans must meet Nashville zoning approval standards (they are specifically asking that the plans include showing that 5 vehicles (20 foot long assumption) can queue on the property without blocking the street and that there is a 12 foot wide by-pass lane and include a Professional Engineer (PE) stamp. Ideal candidates should have experience in commercial site planning, zoning requirements, and PE certification. I already have CAD scaled plans. I need an expedited timeline if possible.

I'm seeking detailed as-built drawings for a commercial building. The drawings are needed for permit submission. Requirements: - Interior layouts - Mechanical, Electrical, and Plumbing (MEP) systems - Format: PDF Ideal Skills: - Proficiency in drafting accurate as-built drawings - Experience with commercial buildings - Familiarity with MEP systems - Attention to detail Please ensure the drawings are clear and ready for permit approval.

I need a structural engineer to review the roof and ceiling structure /foundation of my four-season sunroom addition plans. Needs to have North Carolina seal Ideal Skills and Experience: - Expertise in structural engineering - Experience with residential sunroom additions - Knowledge of roofing and ceiling structures - Ability to provide quick, accurate assessments Please provide your qualifications and relevant experience. Needs to hold a NC seal

I need a complete set of architectural drawings for a room extension that will serve as a new bedroom. The design direction is modern—clean lines, efficient use of space, and plenty of natural light. What I expect from you: • Scaled floor plan showing the integration of the new room with the existing structure • At least two elevations capturing exterior massing and window placement in a modern aesthetic • Basic electrical and lighting layout suitable for plan‐check submission • PDF sheets ready for permitting plus editable CAD files for any future tweaks All dimensions must be accurate to the inch, and drawings should align with standard residential codes (IBC or local equivalent). I will provide existing plans, site photos, and any zoning setbacks ...

I’m moving forward with a commercial project in North Carolina and must have a professional who already holds an active North Carolina license. Because the site is zoned commercial, every phase has to be signed off by someone whose credentials the inspectors recognize, so please confirm your license number and discipline when you respond. At this stage, the detailed scope is still being finalized, but the core need is straightforward: step in as the licensed professional of record, review the current plans, work with the county-provided list for permits, and carry out or oversee the onsite work to keep us code-compliant from start to finish. If your license covers general contracting, electrical, plumbing, or another specialty that typically touches commercial fit-outs, you’re...

I’m ready to commission the full architectural design of a brand-new modern residence. The house will be built on a cleared suburban lot; I already have a survey, zoning data and a detailed wish-list that I will share once we start. What I need from you is the complete residential design journey—from early concept sketches through permit-ready construction documents—executed in a clear, contemporary style with open-plan living, large panes of glass and a strong connection between indoor and outdoor spaces. You may work in AutoCAD, Revit or a comparable BIM workflow; final drawings should be supplied in both editable DWG/RVT and print-ready PDF formats. Deliverables • Schematic concepts: at least two massing options with rough floor-area schedules • Developed...

I'm seeking an experienced architect and construction team for a new modern-style 12-unit apartment building. Key requirements: - Modern architectural design - High-quality materials and finishes - Compliance with local building codes and regulations - Sustainable building practices are a plus - Must be a registered architect in NSW, Australia - Timeline: Completion within one to two months Ideal skills and experience: - Proven track record in multi-unit residential projects - Strong portfolio in modern architecture - Knowledge of sustainable construction methods - Excellent project management skills Please provide your portfolios and relevant project experience.

I need detailed architectural plans created for a commercial building based on provided JPG images of the floor plan. These plans must include the exterior layout, interior layout, and fire safety systems. Additionally, the plans need to be uploaded to the state fire marshal's office in Memphis, Tennessee. Ideal candidates should have experience in commercial building design, familiarity with fire safety regulations, and the ability to work with minimal reference materials. This project is urgent as we need a certificate of occupancy within about three days.

I need an architect who can take a raw concept for a new mobile-telecom tower and turn it into a fully engineered design package. The priority is twofold: 1. Shape the structural concept into a safe, build-ready solution. 2. Produce complete architectural and structural drawings—layouts, elevations, sections, connection details, and any supporting calculations—that a contractor and permitting authority can rely on. I already have the site specifics, antenna loading data, and a basic height requirement; what is missing is your professional touch in transforming these inputs into precise blueprints. AutoCAD or Revit files in both editable and PDF formats will be the final deliverables, accompanied by a concise design brief explaining the key assumptions and load paths. ...

Transform your industrial vision into fully engineered, permit-ready reality with expert Industrial Architectural & Structural Design services. I specialize in warehouses, factories, manufacturing plants, workshops, storage facilities, steel structures, and commercial industrial buildings with precision planning, code compliance, and efficient structural solutions. With professional expertise in architectural drafting, structural calculations, steel/concrete design, permit drawings, and construction documentation, I deliver functional, safe, and cost effective designs tailored to your project goals. What I Offer: • Industrial building architectural design • Structural design for steel, RCC & concrete structures • Factory, warehouse & workshop planning • Pe...

I’m ready to send you the complete CAD model for our first project—a 10,000 sq ft luxury residence—so you can take it from architectural concept to fully engineered structure. My in-house designer has the plans nailed down; what I need now is a structural specialist who can move quickly, meet local building code requirements, and provide clear construction-ready documentation. job responsibilities include • Full foundation design, sized and reinforced for site conditions • Beam and column layouts with member sizing and connection details • Comprehensive structural drawings (your primary deliverable) *Stamped plans set for local Austin Texas USA Permit submissions Everything has to align with the local code set; if you’re already fluent in those...

Planuję postawić niewielki park ferienhaus w Austrii i potrzebuję wsparcia architekta, który sprawnie poprowadzi mnie przez procedurę uzyskania pozwolenia na budowę. Co już mam – Wstępny projekt koncepcyjny budynku (rzuty, elewacje, opis funkcji). Kompletny projekt architectoniczne w dwg _ koncepcja PARK 29 DOMKOW w dwg Czego oczekuję • Analizy mojego projektu pod kątem austriackich przepisów budowlanych oraz lokalnych planów zagospodarowania. • Kompletu rysunków, opisów technicznych i formularzy wymaganych do złożenia wniosku o pozwolenie na budowę (Einreichplanung). • Konsultacji w języku niemieckim z urzędem, aż do wydania decyzji. • W razie potrzeby drobnych korekt projektu, aby spełnić uwagi urzęd...

I already have a schematic Archicad model for a single-family home and now need it turned into a permit-ready construction set. Because the house will be built locally, I’m specifically looking for someone based in the Philippines who understands our drawing conventions, materials, and code references. You’ll continue working in Archicad—no platform hopping—refining my existing file and producing clear, coordinated sheets. Expect to clean up layers, apply the right pensets, and make sure the output plots legibly on A3/A1 pages. We’ll review milestones over Zoom; English is fine, Tagalog even better. Deliverables • Updated Archicad (.pln) file • Print-ready PDF set (plans, elevations, sections, schedules, key details) • DWG expor...

I need an office with 1-2 private offices built on a mezzanine floor. The construction should include: - Gypsum walls - Wood windows - Glass partitions - HVAC and electrical plans I have a rough idea for the layout but will need professional input as well. Ideal candidates should have experience in office construction and layout design.

I need detailed architectural plans for a medium-sized storage shed (1000 - 5000 sq ft) specifically designed for crop storage. Requirements: - Structural integrity to support agricultural needs - Efficient layout for crop storage - Compliance with local building regulations Ideal Skills: - Experience in drafting agricultural buildings - Knowledge of materials suitable for crop storage - Proficiency in relevant design software

I occasionally require quick, clean architectural CAD files of simple handrails. For each request I will send a marked-up sketch or photo; the task is to translate it into a clear drawing that shows all critical dimensions and measurements so a fabricator can work directly from the file. Drawings can stay 2D, saved as DWG and PDF. Turnaround is usually a day or two per sketch, so responsive communication is important. Accuracy of the dimensions is the priority—no need for material call-outs or installation notes at this stage. Expect small batches rather than a single large package, and invoice per drawing as they arise.

I'm looking for an experienced professional to help change the existing house plan for the entire first floor. Key Requirements: - Move the main entrance into the house - Structural changes needed (walls, doors, windows) Ideal Skills and Experience: - Expertise in architectural design and structural modifications - Proven experience with residential projects - Strong understanding of building codes and regulations - Ability to create functional and aesthetically pleasing layouts Please provide a portfolio showcasing similar work and a detailed project plan.

My architectural drawings for a small-scale addition and remodel of a Rhode Island multi-family building are complete; what I still need are engineer-stamped structural plans that the local building department will approve without delay. Scope of work • A 10 × 20 ft two-story bump-out topped with a roof deck • Reconstruction of one existing roof wing Both elements touch the roof and attic, so the set must address new and modified framing, load paths, lateral resistance, connections to the existing structure, and any required upgrades to the basement/foundation interface. Specifications Timber framing is the chosen system, and the design must satisfy current Rhode Island state code as well as any municipal amendments for wind, snow, and coastal exposure. I will sup...

The project is a single-family, wood-framed barn-style residence of roughly 2,000 sq ft to be built in Missouri. I already know I want the look and feel to stay firmly in the rustic camp, and the interior must read as one generous, open floor plan. Everything that follows is about turning that vision into a fully buildable set of documents a local contractor can pick up and price immediately. Scope All drawings must comply with the latest International Residential Code and any Missouri amendments. Because the house will be stick-built, I expect typical U.S. wood-frame conventions—stud sizing, bracing, headers, shear, uplift, and all related detailing—shown clearly. Plans are to be prepared in a professional CAD platform (AutoCAD, Revit, or comparable) and delivered in bot...

I am looking for a licensed architect or engineer with a valid Florida stamp who can prepare signed and sealed plans for a residential Ranch Fence project in Orange County, Florida. I only need the drawings/plans prepared for permitting purposes

I’m about to move a new community / youth center from concept to schematic design and need a structural engineer to shape the overall structural system. The architectural set is ready for review, and I’d like to bring the building out of the ground. My preference is light-gauge steel for the walls, with open web composite joist for our floor system. Our top priority is to facilitate faster and smarter construction. What matters most is a buildable solution that meets U.S. codes and keeps the schedule tight. You will receive the current architectural plans, preliminary loading criteria, and geotechnical data. In return, I’m expecting: • A concise structural narrative that lays out the recommended system, lateral-force-resisting approach, and preliminary member sizi...

I need an experienced architect based in Atlanta for a gas station project in Atlanta, which includes a convenience store and two small retail units. Ideal skills and experience: - Proven track record with gas stations or C-store projects - Strong design and planning expertise - Ability to provide clear timelines and pricing Please provide your portfolio and relevant project experience.

Tôi cần triển khai bộ shop drawing cho một dự án dân dụng loại hình chung cư. Hồ sơ phải hoàn thiện và bàn giao trong vòng 3 tháng kể từ ngày bắt đầu. Phạm vi mong muốn • Triển khai shop drawing chi tiết dựa trên hồ sơ thiết kế hiện có (tôi sẽ chuyển giao ngay khi dự án khởi động). • Đảm bảo thể hiện đầy đủ kích thước, cao độ, ký hiệu và ghi chú phục vụ thi công thực tế. • Phối hợp các hạng mục kiến trúc, kết cấu và MEP để tránh xung đột. • Bàn giao file CAD (hoặc Revit nếu bạn sử dụng BIM) kèm bản PDF tổng hợp. Yêu cầu chất lượng – Đúng quy chuẩn Việt Nam hiện hành...

I’m planning a new ten-storey structure that will operate entirely as commercial offices. Each floor has to balance generous open-plan work areas with a series of enclosed private offices; conference rooms are not a core requirement right now, but I may consider integrating a few later if the layout permits. What I need from you is a full architectural package that takes the project from concept through permit-ready drawings: • Conceptual massing studies and a 3D exterior model that show how the ten levels sit on the site and meet local height or setback limits. • Detailed floor plans for every level, clearly marking open workspaces, private offices, restrooms, elevator and stair cores, service shafts, and MEP zones. • Scalable sections and elevations, plus fa&cc...

Need two permit drawing for project Covered porch (20'w x6'D) elevation 36" Deck (20'w x15'D) elevation 42"

I need an experienced architect/civil engineer to prepare a complete residential building plan for a north-facing house plot. Plot Details: - Plot facing: North - North to South depth: 61 feet - East to West width: 45 feet - Plot size: approximately 45 ft x 61 ft - The plan must be Vastu-compliant - Need proper space utilization, ventilation, natural light, and practical room sizes Important Note: - All houses/units must be North-facing only. - The building plan should include a staircase with lift provision. Floor Requirements: Ground Floor: - Half portion should be used for car parking min 4 cars - Remaining half should have one 2BHK house - Required spaces: dining hall cum hall, kitchen, 2 bedrooms, bathrooms, pooja space, utility area, and proper entrance First Floor: - One full 3...

Tamil Nadu DTCP / Local Body Approval Consultant Needed for Small Hospital Building I need an experienced Tamil Nadu DTCP / local body building approval consultant for a small hospital building in Pudukkottai district, Tamil Nadu. The building already has earlier Town Panchayat approval for around 2000 , but the usage and plan may need to be modified/regularised for hospital / clinic / public building purpose. Work required: Review existing documents and building status Check feasibility for DTCP / local body approval Check Tamil Nadu building rule compliance: setback, FSI, parking, access, ramp, staircase, ventilation, fire safety, etc. Prepare existing and proposed CAD drawings Prepare site plan, floor plan, elevation, section and hospital-use layout Prepare fire safety layout suitab...

I need a physical location for a building design school with an industrial architectural style. Key Functional Spaces: - Classrooms - Workshops - Studios Ideal Skills: - Experience in industrial architecture - Knowledge of educational facility design - Ability to create functional and inspiring learning environments Please provide examples of similar work done. Registered professional in Alberta or British Columbia Canada a definite asset.

I need an experienced CAD specialist to adjust an existing DWG drawing. Requirements: - Add new elements: - Text annotations - Geometric shapes - Modify existing elements: - Reposition elements - Add and remove walls to floor plan Ideal skills and experience: - Proficient in AutoCAD or similar software - Experience with DWG files - Attention to detail - Strong understanding of architectural drawings

Je prépare la construction d’une véranda de 20 à 30 m² à Bruxelles et j’ai besoin d’un dossier complet pour introduire la demande de permis d’urbanisme. Données de base • Style souhaité : Moderne • Matériau principal : verre • Chauffage / refroidissement : Aucun Ce que j’attends de vous Relevé et analyse sur place (ou à partir de mes relevés) pour vérifier la conformité aux prescriptions du RRU et aux exigences de ma commune. Plans à l’échelle (plans d’implantation, plans de niveaux, coupes et élévations) montrant clairement l’intégration de la véranda au bâti existant. ...

I have a pre-designed set of single-family home plans, complete with the original CAD files. The drawings meet general Florida code, but the designer who produced them is not a licensed architect. Before I can submit for permitting, my county requires that the documents be reviewed, brought fully into line with all local ordinances, and then signed and sealed by a Florida-licensed architect. Your role is to: • Review every sheet for compliance with the specific local building codes enforced by my county permitting office. • Make any minor adjustments or notations directly in the CAD files (dwg) so the plan set reflects those code requirements. • Provide a final, signed and sealed PDF plus two plot-ready sheets that will satisfy the building department’s submittal...

I'm seeking an experienced architect and interior designer to redesign my mountain house in the Philippines. The goal is to improve functionality, enhance aesthetics, and increase energy efficiency across all areas of the property. Key requirements include: - Redesigning all areas: living space, bedrooms, bathrooms, and outdoor areas for improved functionality. - Aesthetic enhancement with a mixed modern and traditional interior design style. - Incorporating energy-efficient solutions. Ideal candidates should have: - Proven experience in architectural redesign for residential properties, in Baguio, Philippines - Strong portfolio in modern and traditional interior design utilising materials available in the Philippines - Knowledge of energy-efficient building practices and materials ...

1) Project Description The project consists of designing a modular date sorting facility located within a farm environment. Number of rooms: 12 rooms Room size: 6 m × 6 m each Clear height: 3.0 m Floor level: Raised platform (+0.60 m above ground) Layout: U-shaped arrangement Central area: Open courtyard for vehicle access and material handling The rooms will be used for initial date sorting, cleaning, and temporary packaging before transferring to a final processing facility. 2) Architectural Scope The consultant shall provide: Site plan (overall layout) Detailed room layout (6×6 modules) Floor plans, elevations, and sections U-shaped building configuration Raised slab/platform details (1.5 m front & rear extension) Wall construction details: Lower wall: block + ceramic fi...

I’m ready to move forward with a new residential build and I need a qualified architect to turn my ideas into clear, permit-ready drawings. At this stage I know the project is definitely residential; the exact number of floors is still open for discussion (my initial input simply read “floor,” so I’d appreciate your professional guidance on what configuration makes the most sense). Here’s what I’m looking for: • Concept development based on my requirements, site conditions and local codes • Full architectural drawings (plans, elevations, sections) suitable for permit submission • A coordinated floor-plan layout that optimises space and natural light • 3D visuals or a simple model so I can better understand massing and materials...

I need a full, permit-ready design package for a 36’-wide by 30’-deep warehouse with 18’-high walls here in Phoenix, Arizona. The building will serve strictly as storage for general goods, so the interior can stay mostly open. A single ADA-compliant restroom and a small break area with a sink must be integrated along one side. The floor will be a standard concrete slab; no epoxy or special coatings are planned. All drawings, calculations, and notes have to satisfy the current City of Phoenix building, energy, plumbing, electrical, and fire codes as well as the relevant IBC references. That means you will need to address setbacks, wind and seismic loads for this region, sprinkler or other fire-suppression requirements, and any accessibility details the city enforces. Del...

I’m finalising the concept for a new commercial building (Tower) and need a parametric façade resolved in Rhino and Grasshopper within the next 24 hours. The core massing is already set, so the task is to generate an elegant, build-able skin that fits the grid I will supply and can react to solar orientation. Please share at least one completed Rhino/Grasshopper façade project (screenshots or a short clip is fine) when you respond—seeing proven, similar work is essential, as I release payment only after the file is handed over and verified. What I’ll supply the moment we start: • The clean Rhino base model (.3dm) with floor plates and structural grid • A brief PDF noting design intent, material palette, and shading requirements What I need...

I need a complete drawing package for a one-bedroom house with a loft that will pass the building-permit review in Duncan, BC. The design concept is already clear to me: a traditional exterior but an open-floor interior on the main level. I will supply the exact footprint, ceiling heights, and site survey as soon as we start, so you can work directly from precise dimensions rather than approximations. Because these plans are destined for the local permitting office, they must satisfy the current BC Building Code and any City of Duncan submission standards. I expect the usual set that a residential plans examiner looks for—site plan, dimensioned floor plans, roof plan, elevations, building sections, and construction notes—delivered in PDF for submission and DWG or Revit for fut...

No AI Pictures!!!! Modern Hillside Luxury Villa – Architectural Concept Competition We are looking for exceptional architectural concepts for a modern luxury hillside residence on a sloped plot in Austria. The property must accommodate two separate houses, each with approximately 250 sqm living area. However, only one house needs to be fully designed in detail. The second house can remain conceptual to demonstrate the overall site strategy and placement. The goal of this competition is to generate: innovative floorplan ideas strong architectural concepts photorealistic 3D renderings a unique and timeless architectural identity Architectural Vision The architecture should feel: modern minimalistic timeless warm and luxurious integrated into the landscape We are NOT looking for generi...

Hello! I'm an architecture student currently working on a design project "bamboo museum + art and craft centre", ~6-acre site in central India and I'm looking for a consultant or design mentor who can guide me in developing my design. I want someone who can guide me through both 2D and 3D work. I have some plans and sections already drafted, but I think I've messed up with area programming. I need proper guidance and have a deadline in 4 days. Pref: Architecture graduate or licensed architect with experience in vernacular/bamboo work, parametric bamboo 3D modelling, or large-span structures, who can help me finalise my design and floor plans. Doesn't need to be continuous sessions timely review and mark-up feedback works. Kindly drop rates student-budget fri...

Hi I will share the details with the shortlisted candidates. Thanks

I need a set of drawings for a residential passenger elevators. Because these plans are strictly for submission to the local authority—not for fabrication—I’m counting on someone who already understands the EU norms, shaft dimensions, pit and overhead requirements, machine-room (or MRL) layouts, and all the other details that reviewers look for. You’ll work from architectural layouts, similar project and my mechanical notes, translate them into a complete elevator layout package (layout, sections, plan views, and required schedules), and return both DWG files for my review and finalisation. If you have a portfolio of previous elevator drawings you’ve handled, let’s talk. I’ll pay on a per-project basis and can keep the work flowing as new projec...