โลโก้ Freelancerมันทำงานอย่างไรค้นหางาน
เข้าสู่ระบบ ลงทะเบียน
โพสต์โปรเจค
ค้นหา
3D Design
Aerospace Engineering
Mechanical Engineering
Mechatronics
Product Design
ภาพปกโปรไฟล์
คุณกำลังติดตาม
มีข้อผิดพลาดติดตามผู้ใช้
ผู้ใช้รายนี้ไม่อนุญาตให้ติดตามได้
คุณได้ติดตามผู้ใช้รายนี้อยู่ก่อนแล้ว
แพ็กเกจสมาชิกของคุณให้สิทธิคุณติดตามได้ไม่เกิน0 คน เท่านั้น อัปเกรดแพ็กเกจสมาชิกได้ที่นี่
เลิกติดตาม สำเร็จแล้ว
มีข้อผิดพลาดในการเลิกติดตามผู้ใช้
คุณได้แนะนำ
มีข้อผิดพลาดในการแนะนำผู้ใช้
มีบางอย่างผิดพลาด โปรดรีเฟรชหน้าแล้วลองอีกครั้ง
ยืนยันอีเมลเรียบร้อยแล้ว
รูปอวาตาร์ของผู้ใช้
$15 USD / ชั่วโมง
ปักธงของ MEXICO
san luis potosi, mexico
$15 USD / ชั่วโมง
ตอนนี้เป็นเวลา 1:14 หลังเที่ยง ที่นี่
เข้าร่วม กรกฎาคม 20, 2018
0 Recommendations

Marco Saul C.

@MarkBravo1

 5.0 (5 รีวิว)
7.4
7.4
0%
0%
$15 USD / ชั่วโมง
ปักธงของ MEXICO
san luis potosi, mexico
$15 USD / ชั่วโมง
100%
ทำงานสำเร็จ
100%
อยู่ในงบประมาณ
100%
เสร็จตามกำหนด
N/A
อัตราการจ้างซ้ำ

Embedded Software Engineering & Mechatronics.

Hi, I´m Marco. I'm running my own automation company and have been freelancing for more than two years here in Mexico. Previously I worked as an embedded software engineer for a big German company. I consider myself as someone who strives for good ideas, who knows how to back them up in solid principles of engineering design, in order to turn them into functional and ready-to-produce devices.
Freelancer Product Designers Mexico
ดู Product Designers ทั้งหมดใน Mexico

ติดต่อ Marco Saul C. เกี่ยวกับงานของคุณ

เข้าสู่ระบบเพื่อหารือเกี่ยวกับรายละเอียดผ่านการแชท

ผลงาน

4493051
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
4413977
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
4519844
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
4521777
I also do aerial photogrammetry with drones. This is the easiest way to get detailed 3D models of buildings, highways, mountains etc. You only need a reliable drone equipped with an HD camera and a planner mission software. Once the drone is in the air, it takes photographs of the ground at regular time intervals following a preprogrammed flight path. It basically scans the area with photos. Then the photos are feed to a photogrammetry software, which does the magic of recreating from 2D images, a high-definition and detailed 3D model. I use Pix4D as the photogrammetric software. A colleague and I provide this service to mining companies mostly. We retrieve for them, geological data like terrain volume and feature geo-localization for example. We have modeled like one hundred of hectares so far.
Drone Photogrammetry
4406568
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
4398301
Recently I designed and built a bottle agitator machine for a mining industrial laboratory. The machine was invented from zero and there are no similar ones on the market. From the structural frame to the bottle holders I designed all the mechanical components and the software too. Electronics was purchased and integrated. The purpose of the device is to perform separations of chemical mixtures efficiently, according to the customer requirements. It is capable to agitate the bottles in two different patterns: vertical and horizontal as shown in the video. The horizontal movement creates a whirlpool inside the bottle, this is an effective method to separate the mixture. Both motion patterns were requested by the customer. The system is controlled by a Raspberry Pi. A simple GUI allows users to operate the machine through a touchscreen. Programming was made in Python using the Kivy framework for building GUIs.
ShakerLab: Automated Agitator Machine
4493051
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
I really like to "bricolage" Robots and RC cars out of mechanical scrap, just for fun. I'm fascinated with mobile robotics, UGV's in particular. I have done several designs... here is a couple of them.
DIY UGVs
4413977
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
Recently I won one of the NASA contests from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks as camcording and sensor measurings for example. NASA crowdsourced the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. NASA has posted a few contests in order to address this design problem from different perspectives. I decided to participate in a couple of them and I was lucky to won one. The contest consisted of designing an Electrically Driven Clamp (EDC) as the end-effector for the AstroBee robotic arm. Honestly, my design may have some implementation flaws, but... I consider that the idea is conceptually valuable, so NASA did it too.
NASA Contest: Electrical Driven Clamp for AstroBee
4519844
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
I won another NASA contest from the AstroBee series. NASA is developing a (new) robotic assistant for the International Space Station (ISS) called AstroBee. This assistant navigates all over the ISS autonomously, helping astronauts with tasks such as camcording and sensor monitoring for example. NASA decided to crowdsource the development of a key functionality of the system: A robot arm for the AstroBee, so it became capable of perching to the ISS walls and keep a fixed position when required. So NASA has posted a few contests in order to address this design issue from different perspectives. I decided to participate and I was lucky to won... again. This time the contest consisted of designing the electro-mechanical system for the robotic arm, from the mechanical architecture to actuator selection for example. Thank you NASA for having the initiative to engage people in your projects. Being able to take a look in a real NASA project was amazing.
NASA Contest: Electro-Mechanic Arm for AstroBee
4521777
I also do aerial photogrammetry with drones. This is the easiest way to get detailed 3D models of buildings, highways, mountains etc. You only need a reliable drone equipped with an HD camera and a planner mission software. Once the drone is in the air, it takes photographs of the ground at regular time intervals following a preprogrammed flight path. It basically scans the area with photos. Then the photos are feed to a photogrammetry software, which does the magic of recreating from 2D images, a high-definition and detailed 3D model. I use Pix4D as the photogrammetric software. A colleague and I provide this service to mining companies mostly. We retrieve for them, geological data like terrain volume and feature geo-localization for example. We have modeled like one hundred of hectares so far.
Drone Photogrammetry
4406568
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
These modules are IoT interfaces designed to automatize a common piece of industrial equipment know as Variable-Frequency Drives (VFD). Basically, it is a box with a Raspberry Pi inside running a fancy GUI that communicates with the VFDs thought the Modbus protocol. These modules provide a way to control and automatize the equipment on-site but also, they can be connected to the internet and communicate with a cloud server leveraging Industry 4.0 capabilities. You can monitor and control in real time the equipment from your office and automatize simple decisions like performing maintenance for example. The modules were designed and programmed by me, while a colleague of mine helped me with the back-end and front-end software apps. This is the closest thing I have to a product but it is not yet. Every time I sell/install one of these I have to modify the software slightly since every application is different. Anyway, it has been a successful project so far.
MicroPGA: IoT Module
4398301
Recently I designed and built a bottle agitator machine for a mining industrial laboratory. The machine was invented from zero and there are no similar ones on the market. From the structural frame to the bottle holders I designed all the mechanical components and the software too. Electronics was purchased and integrated. The purpose of the device is to perform separations of chemical mixtures efficiently, according to the customer requirements. It is capable to agitate the bottles in two different patterns: vertical and horizontal as shown in the video. The horizontal movement creates a whirlpool inside the bottle, this is an effective method to separate the mixture. Both motion patterns were requested by the customer. The system is controlled by a Raspberry Pi. A simple GUI allows users to operate the machine through a touchscreen. Programming was made in Python using the Kivy framework for building GUIs.
ShakerLab: Automated Agitator Machine

รีวิว

บันทึกการเปลี่ยนแปลงแล้ว
กำลังแสดง 1 - 5 / 5 รีวิว
 กรองผลการค้นหารีวิวโดย:
5.0
$500.00 USD
NASA Contest: Design a Robotic Arm Software Architecture
Marco Saul C. submitted a design for our NASA Astrobee Robotic Arm contest series and was helpful/responsive in supporting our research study.
Odd Jobs
Embedded Software
Arduino
Product Management
C++ Programming
+ อีก 5 ทักษะ
รูปอวาตาร์ของผู้ใช้
ปักธงของ Nasa T.
@nasacoeci
•
4 ปีที่ผ่านมา
5.0
$5,000.00 USD
NASA Contest: Design a “Smart” Robotic Arm
Marco Saul C. submitted a design for our NASA Astrobee Robotic Arm contest series and was helpful/responsive in supporting our research study.
Odd Jobs
Electronics
Mechatronics
Mechanical Engineering
Biotechnology
+ อีก 14 ทักษะ
รูปอวาตาร์ของผู้ใช้
ปักธงของ Nasa T.
@nasacoeci
•
4 ปีที่ผ่านมา
5.0
$250.00 USD
NASA Contest: Design a Mechanically Driven Clamp
Marco Saul C. submitted a design for our NASA Astrobee Robotic Arm contest series and was helpful/responsive in supporting our research study.
3D Design
Odd Jobs
CAD/CAM
Product Design
Solidworks
+ อีก 6 ทักษะ
รูปอวาตาร์ของผู้ใช้
ปักธงของ Nasa T.
@nasacoeci
•
4 ปีที่ผ่านมา
5.0
$4,000.00 USD
NASA Contest: Design an Electro-Mechanical Arm
Marco Saul C. developed a very creative design for an electro-mechanical robotic arm. This was a contest and this design was selected from 40 entries as the most feasible and least mass design. Marco Saul C. provided a thorough design submission and a very innovative design.
Odd Jobs
Mechanical Engineering
CAD/CAM
Manufacturing Design
Engineering Drawing
+ อีก 11 ทักษะ
รูปอวาตาร์ของผู้ใช้
ปักธงของ Nasa T.
@nasacoeci
•
6 ปีที่ผ่านมา
5.0
$250.00 USD
NASA Contest: Design an Electrically Driven Clamp
Marco Saul C. developed an innovative design for an electrically driven clamping mechanism. This was a contest and this design was selected from 16 entries as the most feasible and least mass design. Marco Saul C. provided a thorough design submission and was very helpful in the final handover and product delivery.
3D Design
Odd Jobs
CAD/CAM
Product Design
Solidworks
+ อีก 6 ทักษะ
รูปอวาตาร์ของผู้ใช้
ปักธงของ Nasa T.
@nasacoeci
•
6 ปีที่ผ่านมา

ติดต่อ Marco Saul C. เกี่ยวกับงานของคุณ

เข้าสู่ระบบเพื่อหารือเกี่ยวกับรายละเอียดผ่านการแชท

การยืนยันตัวตน

Freelancer ชั้นแนวหน้า
ยืนยันตัวตนแล้ว
ยืนยันช่องทางชำระเงินแล้ว
โทรศัพท์ได้รับการยืนยันแล้ว
ยืนยันอีเมลแล้ว
เชื่อมต่อ Facebook แล้ว

ทักษะเด่น

Product Design 5
Mechanical Engineering 4
Mechatronics 4
3D Design 4
Aerospace Engineering 2

ค้นหา freelancer ที่คล้ายกัน:

Product Designers in Mexico
Product Designers
Mechanical Engineers
Mechatronics Engineers

ค้นหาผลงานที่คล้ายกัน

Product Design
Mechanical Engineering
Mechatronics
3D Design
ผู้ใช้ก่อนหน้านี้ ผู้ใช้ถัดไป
ส่งคำเชิญเรียบร้อยแล้ว
ขอบคุณ! เราได้ส่งลิงก์สำหรับเครดิตฟรีให้คุณทางอีเมลแล้ว
เกิดข้อผิดพลาดขณะส่งอีเมลของคุณ กรุณาลองอีกครั้ง
โลโก้ Freelancer Thailand / ภาษาไทย ช่วยเหลือและสนับสนุน FreelancerประเภทโปรเจคการประกวดFreelancerองค์กรแพ็กเกจสมาชิกโครงการ Freelancer ชั้นแนวหน้าการจัดการโปรเจคงานในพื้นที่Photo Anywhereหน้าจัดแสดงผลงานAPI สำหรับนักพัฒนาได้รับการยืนยันDesktop App เกี่ยวกับเกี่ยวกับเราวิธีใช้งานความปลอดภัยนักลงทุนแผนผังเว็บไซต์เรื่องราวข่าวออกสื่อทีมรางวัลข่าวประชาสัมพันธ์ร่วมงานกับเรา ข้อกำหนดนโยบายความเป็นส่วนตัวข้อกำหนดและเงื่อนไขนโยบายลิขสิทธิ์ข้อพึงปฏิบัติค่าธรรมเนียมและค่าบริการหุ้นส่วนEscrow.comLoadshiftWarrior Forum แอปโลโก้ Apple App Store โลโก้ Google Play
ไม่สามารถคัดลอกไปยังคลิปบอร์ดได้ โปรดลองอีกครั้งหลังปรับเปลี่ยนการอนุญาต
คัดลอกไปยังคลิปบอร์ดแล้ว
ผู้ใช้ที่ลงทะเบียน งานที่มีการโพสต์ทั้งหมด
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
กำลังโหลดตัวอย่าง
ได้รับอนุญาตสำหรับตำแหน่งทางภูมิศาสตร์
เซสชั่นการเข้าสู่ระบบของคุณหมดอายุและคุณได้ออกจากระบบแล้ว กรุณาเข้าสู่ระบบอีกครั้ง