Mechanical design engineer in australiaงาน

ออกแบบ/แก้ไข Assembly Drawing และ Parts Drawing ทำ Manual ของเครื่องจักรด้วย

ต้องการหาทีมงานที่มีความรู้ทางด้าน AD Migration , Email Security , Backup Solution เพื่อบริการลูกค้า

I'm in need of a network engineer with expertise in the Local Area Network (LAN) infrastructure for troubleshooting and optimization. Key Tasks: - Install, rack, and stack a Cisco Catalyst 8300 series device. This includes unboxing, physical mounting, and initial power-on to ensure the device is operational. - Network Troubleshooting: The freelancer should be able to identify and rectify any issues affecting the LAN's performance. - Installation: If necessary, the engineer should help in the setup of new equipment or software for the network. Ideal Candidate: - Proven experience in LAN network design and architecture. - Strong troubleshooting skills and experience in network optimization. - Good knowledge of network secu...

We are in need of an experienced civil engineer to reinforce a 5-10 feet high block wall currently showing moderate wear and tear. The purpose of the engineering is to strengthen the wall, with potential for future slab works on top. Must-haves: - Proven experience in structural engineering, specifically related to block wall reinforcement. - Ability to assess wall condition and provide optimal reinforcement solutions. - Ability to manage project requirements according to safety regulations and standards. -Capability to work within potential further development plans. The ideal candidate will need to provide professional assessment and reinforcement design to ensure the wall's stability and potential for further enhancements.

Re-Design and Add to our Product Labels (See Attached Examples). Use Different Golf Cart Pictures And/Or Colors To Differentiate Between The Different Models. Each Label Will measure 5 Inch (127MM) Height x 8 Inch (203MM) Width. Key Points For Each Label Are: CanLiFe Lithium Golf Cart Battery * A Single Drop In CanLiFe Lithium Battery Replaces An Entire Set Of Conventional Lead Acid Batteries & Can Operate A Stock Golfcart In Any Terrain. * Assembled In Canada * Backed By A 6 Year Limited Warranty * Estimated Range And Capacity To Be Displayed Prominently * Bluetooth Enabled - Monitor State Of Charge From Your Phone Total of 12 Labels to be created: Front Plaques: CanLiFe Lithium Golf Cart Batteries 36 Volt 56 Amp Hour (2.07 Kilowatt) Capacity 25-3...

I am in need of an experienced hardware engineer, fully versed in circuit design and PCB layout. My aim is to develop a novel product. To meet the project objectives, the following experience and skills are critical: - Proficiency in circuit design - Expertise in PCB layout - Experience in working with Microcontrollers Understanding the intricacies of Microcontrollers is key as they are the central component for the new design. Efficiency, attention to detail and creativity in your approach will significantly contribute to the success of this innovative product design.

...experienced design engineer who can assist me with designing single-phase generators in 10kW, 20kW, 30kW, and 40kW capacities for the Canadian market. This project involves a thorough review of the Cummins, Kohler, and Briggs and Stratton product offerings; seeing what makes them unique in their design and then coming up with our design. Key deliverables for this project include: - A detailed design proposal for a new brand of single-phase generator tailored for the residential market. - Recommendations for optimal capacity levels (10kW, 20kW, 30kW, and 40kW) based on market demand, competitor analysis, and technical feasibility. - A comprehensive comparative analysis of the existing Cummins, Kohler, and Briggs and Stratton products....

I am seeking a proficient Revit and AUTOCAD user to create detailed structural plans. As a structural engineer, I have already completed all necessary calculations. Therefore, no additional computations are required for this project. The primary task will be to draw the plans according to my specifications. Please note that this project solely involves drafting; all engineering aspects have been addressed. The successful candidate should have a strong understanding of Revit and be able to produce detailed, accurate plans based on the information provided. Looking forward to working with you. Thank you.

...wedding photography/event photography business in Sydney, Australia. I'm in search of a seasoned SEO expert specialised in the wedding/event photography space with a knack for improving search engine rankings, significantly increasing website traffic, and amplifying online visibility. Specifically tailored to target local customers in Sydney Australia only, the primary objectives of this role entail: - Conducting a comprehensive website SEO analysis - Optimizing website content and structure to appeal to our local customer base - Ensuring consistent online visibility across various search engines - Successfully generate organic leads There's no set deadline for this project. The perfect individual for this role would possess: - Prov...

I have a 58-second audio file with speech that has been marred by background noise. I'm seeking a professional audio engineer who can clean up the file and remove the static, ensuring the final audio quality is as pristine as possible, with minimal to no background noise remaining. SECOND HALF OF AUDIO NEED TO CLARIFY VOICES- YOUNG BOY TALKING TO HIS FATHER WHO HAS PLANTED EVIDENCE FOR HIS OWN CRIME. NEED TO HEAR IT AS SOON AS POSSIBLE This task requires someone well-versed in audio editing who can preserve the original content while significantly reducing the presence of background noise AND PERHAPS LOWER THE OVERLAPPED FAKE POLICE YELLING ON TOP.... Experience with radio or similar audio content is a plus. ANYONE WHO CAN DO IT FAST.

I'm seeking a talented designer to create a visually appealing logo for my company, "Helping Hand Australia." The logo should be crafted in a blue and light blue color scheme, capturing a friendly and happy emotion. Key requirements include: - A design that embodies the brand ethos of being a 'helping hand'. - A predominantly blue and light blue color palette. - A friendly and happy feel in the design. Ideal skills for this project: - Experience in logo design, especially for companies with similar ethos. - Strong understanding of color psychology and its impact on branding. - Ability to create designs that evoke specific emotions. Please include a portfolio of your previous work in your bid, especially a...

I'm seeking a seasoned back-end engineer with expertise in Node.js and MongoDB. Your primary responsibility will be developing APIs that integrate seamlessly with external services. Key tasks include: - API development: You should have a proven track record of creating robust, efficient APIs. - Integrating with third-party services: The APIs you develop need to be able to communicate effectively with a range of external platforms. - Database design and optimization: While not the core focus, a strong understanding of MongoDB and how to optimize it for performance and scaling is beneficial. The project is centered around building a backend system that can handle a variety of tasks and interactions. While the exact scale of the project isn't currently known, ...

...cater to individual car owners. The primary goal of the website is to display our services and provide contact information for potential customers. Key Features: - Display services: You'll need to design a layout that elegantly showcases the various services we offer, including tuning, repairs, and mileage correction. - Contact Information: Easily accessible contact details for inquiries and appointments. - User-friendly Interface: Ensure that the website is intuitive and easy to navigate for our target market, which is individual car owners. Ideal Skills and Experience: - Web Design: Proficiency in designing user-friendly websites with strong visual appeal. - Automotive Industry Knowledge: Understanding of automotive services will be a plus. - UI/UX Exper...

...minimalistic in style, with a soft and pastel color scheme. - It should feature a specific icon, something to do with camping and/or caravanning, as the main element. I have added some ideas which I am not wedded to. - The intro and outro video clips should reflect the same minimalist aesthetic and soft, pastel color theme, incorporating the logo into a brief, engaging animation with a catchy tune. Outro should include social media links and invite the users to like, subscribe and even message us. The name will be 'A Life Less Ordinary' with a tag line of ' Living life - differently' about a family taking a year to travel around Australia in a caravan. Ideal skills and experience for this job: - Expertise in logo design, parti...

I'm looking for an experienced design engineer to finalize the design of a functional metallic safe. This 10cm diameter round product is intended to function as a mini safe for storing small objects. It's not complex, design is on the last phase, we need a pro to complete the design to be ready to manufacture. The safe resembles a medal, consisting on a top and bottom part that screws together closing the safe. 3 main screws are needed to be designed, plus some other technical details to be defined, such has best thread sizes, materials, finishing and aesthetics. Also a small locking design is needed to be implemented. To complete this project, you'll need: - Proficient knowledge in mechanical design - Expertise...

Require a draft sketch of the attached - Drawing Emphasis: The focus of measurements - Skillset: Candidates with proficiency in mechanical engineering and a specialty in structural components are encouraged to apply. Prior experience with motor base designs will be a significant advantage. Your task will be to create a functional and practical design, and your insightful input will be of great value.

Hi, I need help with optimizing this air-venturi. The goal is to: 1, Adjust this air-venturi to maximize the water-aeration with as small air bubbles as possible with given parameters 2, Make it to deliver 200 and 300 liters/h (2 variants) of at 3 bars water pressure. Plus that i need some help to calculate pressure drops in PVC pipes and other flow related tasks . I prefer to pay per hour. And as we are a unfortunately poor startup, lowest rate wins. Please answer with a personal reply and not an AI generated one.

I am seeking a proficient blockchain engineer on TON blockchain (The Open Network) to implement a wide array of smart contracts on my website. The successful freelancer will have extensive experience with: - Token creation and management - Decentralized finance (DeFi) protocols - Non-fungible tokens (NFTs) - Processes of Buying Jetton, conversions, NFT launches - Creating secondary marketplace - Burning NFTs ---------- About project: STONE on TON This project introduces an innovative approach by creating an efficient ecosystem for launching and selling collections of goods from various sources on the Ton blockchain. The project's combination of RWA, unique collections, buyer privacy, and proprietary storage provides convenience and security for project participants. P...

I'm in need of a structural engineer to do Manual hand Calculations

...structural engineer to check that work done by a builder ten years ago is safe, so that I can rent out or sell the property. A non-supporting wall was removed between a kitchen and a dining room. The builder put in a steel beam which he said was stronger than necessary, but he also said that it would need signing off. He said that whoever inspected would want to see that the pad stones or cap stones had steel reinforcement in them. Ordinarily this would be the man from the council. I want an independent engineer. I am naively thinking that I need a certificate to say that this is safe and that it complies with Building Regulations. The quote I have had was to do calculations based on my measurements, with the proviso that it was based on my measureme...

I am in need of a coder well-versed in Lua and experienced with IceSL. The task involves: - Developing a Lua script that can generate a 3D model. - The 3D model in question is a cycloidal gear and pinion element, generally employed In clock gears. Skills and Experience Required: Mechanical Engineer - Proficient in Lua scripting language. - Experience with IceSL for 3D modelling. This task requires an understanding of code as well as a foundational knowledge of mechanical engineering principles. If you possess these skills and experience, I'd love to hear from you. Please include any relevant work in your proposal.

โปรดลงทะเบียน หรือเข้าสู่ระบบ เพื่อดูรายละเอียด

(admin please note I do not want this to be a recruiter project) Hello Freelancers! Please write the answer to this question at the top of bid "what is the capital of Australia?" Hello, I'm looking for people who can provide similarity detection services in relation to content (writing). I am ok to pay $1usd or less per one similarity detection service. If you have access to similarity detection services, please write in the bid which similar detection services you have access to. I'm mainly looking for access to services that start with the four letter Turn.... Please write "I have access to a similarity detection service starting with T" at the end of bid. I’m especially looking for persons who have a similarity detection ser...

I am seeking a talented machine learning engineer or data scientist to create an automaton for recognising handwritten digits specifically within mathematical problems. Responsibilities: - Develop a machine learning algorithm capable of recognising handwritten digits - The primary focus will be on mathematical problems - Ensure accuracy and adaptability to various handwriting styles - Configure the algorithm to output recognized digits as digital numbers Ideal skills & experience: - Proficiency in machine learning algorithms and principles - Extensive experience with handwriting recognition software - Demonstrate capabilities in Python, TensorFlow or similar platforms - Have a deep understanding of Optical Character Recognition (OCR) - Familiarity with mathemat...

I'm in need of a new jumper design for my drill team. This jumper will serve as a casual wear for our team. We want this to be a Casual item which still reflects the company in a professional manner and makes our competitors staff want to wear our jumper. The Jumper will most likely be a black hoodie with your design being mostly white possible with some colour from our Brand Colour Palette Jumpers from The CFMEU in Victoria Australia are quite common examples of what we are after Words that could be used include Drill Crew Rockwell Rockwell Drilling Driller Geotech Exploration Our Logos Include Rockwell Safety is our Core Colours are Yellow Blue Green Key Requirements: - The jumper needs to have unique patterns or prints that stand ou...

I'm looking for an experienced building engineer to help design a small 2 bedroom, modern, single-level weekend house that serves as a vacation retreat on Murray River SA near Morgan. - The ideal candidate should have a deep understanding of architectural design, particularly modern aesthetics. - Experience in designing vacation retreat homes will be highly preferred. I'll appreciate an engineer who can provide innovative, practical, and cost-effective solutions to ensure a comfortable and functional living space. Please showcase your portfolio while bidding. Looking forward to collaborating with you!

Hi, I hope all folks are doing well. I need someone to assist me in online task. A person needed from stripe supported country. Preferably from Canada, Australia. What you need to do? You need to help me get into Medium (Partner Program). In order to that, I need address information. And Id verification for Stripe. If you can assist me in this task. I can pay you by task or you can partner with me for my blog earning. Which means if I started earning from my blog, I will pay you $50 each month. makelivingonline1 at the rate of Thanks

I'm seeking an experienced and skilled engineer, data scientist to assist in optimizing the cooling power of a new metamaterial. The project involves algorithm development to achieve our cooling optimization goals. I will forward you a report where they've used Genetic Algorithm method to optimize parameters. She has used four flux theory to predict optical properties for different particle parameters. you should not optimize the reflectance... in your work, you should optimize the cooling power Requirements: Proficiency in MATLAB Strong background in optics, material science, or related fields. Experience with genetic algorithms and parameter optimization techniques. Excellent communication skills and ability to work independ...

I'm currently in need of a skilled engineer with experience in structural analysis, particularly with steel structures, to help optimize the design of my project. Project involves suggesting furnace column, beams , plates etc sizes as per Australian standard, and material sizes available in Australian market. Key Responsibilities: - Conduct a comprehensive structural analysis of the steel structure - Analyze and interpret the results for optimization recommendations - Make design suggestions based on the analysis - Ensure the structural integrity of the steel structure Ideal Skills: - Proficiency in AutoCAD - Previous experience in structural analysis and design - Knowledge of steel structures - Ability to provide actio...

I'm looking for a skilled audio engineer to mix and master a 3 minutes pop cover song. - Genre: Pop - Final Format: WAV The project consists of: - Enhance the audio quality of the track - Ensure the music and vocals are well balanced - Apply appropriate effects for a polished sound - Deliver the final version in WAV format This project requires: - Proficiency in audio mixing and mastering - Experience in working with pop music - Attention to detail for quality output Please let me know your quote and estimated delivery time.

I'm looking for an expert machine software engineer who can proficiently integrate software with hardware. Key tasks: - The successful freelancer will be required to integrate software with an industrial control system and Programmable Logic Controllers (PLCs). Ideal skills and experience: - The ideal candidate will have considerable experience in machine software engineering, with a focus on software and hardware integration. - In-depth understanding and hands-on experience with industrial control systems and PLCs are crucial for this task. - Experience with programmable logic controllers (PLC) is particularly critical. We are looking to build a load bank with Canbus or another form of communication protocol that can be controlled from a single location. Sof...

I'm currently in the design phase of an electronics project and require an electrical engineer with a specialization in electronics to assist me. Key Tasks: - Design Assistance: I need help with designing various electronic components of the project. This requires high-level knowledge of electronics, particularly on how to integrate circuits and make them work seamlessly. Ideal Skills and Experiences: - Expertise in Electronics Engineering: A deep knowledge of electronics is essential for this role. You should have experience working on similar projects and be able to demonstrate a strong understanding of electronic design principles. - Circuit Design Skills: Experience in designing complex circuits is a plus. You shoul...

Project Details Docker and K8s * Containerize any Microservices based app (Frontend and Backend and DB) and run it as a nonroot user. * Write Kubernetes artefacts to deploy above container on K8s. * Setup Database in Kubernetes cluster. * Deploy microservice to Kubernetes cluster. * Ensure that applications are able to communicate with each other. * Only Ul should be Publicly accessible and not the backend. CI-CD * Automated Application Deployment via CICD. * Setup Jenkins in the Ec2 instance created via Terraform. * Create CICD pipeline to automate the actions done in Phase 1 with stages like Build and Push, push the images to Dockerhub, Update the Kubernetes Artifacts with latest image tag and deploy to the cluster.

I'm looking for a corporate professional logo for an IT recruitment company called Tech Talent Partners. Minimal, elegant and sleek in design style. Would like to incorporate some elements of technology and a globe focusing on Australia. Colours to be used: Green and White, Red and White or Blue and White. Simple, modern font.

Hi, Looking for an individual freelancer not companies We are small scale medical recruitment company based in Australia. Seeking for someone to do the below tasks for us on a monthly basis. It will be part time long term work 10-15 days a month approximately. Convert resumes to our Letterhead format (50 resumes a month approximately) Add candidates to Job Adder- we will give link & training (50 candidates a month approximately) Add updated details of candidates, medical centers, jobs & etc to system & our database Add new medical staff jobs to the system - From 25 websites approximately- twice a week Desirable Skills Attention to detail Very good knowledge in English Quick learning skills & hard work Past experience & good reviews will be an ad...

I'm looking for an Engineer to design and install fire curtains in my commercial office. Key Requirements: - The project is for a commercial building, specifically an office space. - The primary goal is to have a system that will provide both fire and smoke control. Ideal Skills: - Experience with designing fire curtains, particularly for commercial purposes. - Strong understanding of fire and smoke control systems. - Knowledge of relevant building codes and safety regulations.

I'm in need of a structural engineer or a person with a relevant background in load-bearing support. The project involves the use of I beam sections, particularly an ISMB-300 beam acting as a column and another ISMB-300 beam acting as a beam. Specific Details: - The ISMB-300 beam will connect to the web of an ISMB-500 column. - The ISMB-300 beam will connect to the flange of the ISMB-500 column. - The connection will be executed by 3 - 20mm diameter bolts. - The I beam sections will be put to use in an industrial environment. - The load anticipated for these I beam sections is a medium load, ranging from 5 to 15 tons. Ideal candidates for this project should have a strong understanding of load-bearing support structures, and experience in designi...

โปรดลงทะเบียน หรือเข้าสู่ระบบ เพื่อดูรายละเอียด

I'm looking to get architectural drawings stamped for a renovation project of a 150 year old timber frame barn. The drawings we're approved by the building department and work commenced. The inspector has now decided that he wants a structural engineer to review the project before it can move forward. I am looking for a structural engineer licensed in NY state to review the project, offer changes if needed, and stamp the drawings. A swift turnaround time is appreciated. Thank you.

I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components...

I'm seeking to upgrade my existing 6.2 kW solar system. I need assistance with redesigning the system by adding four new panels. Additionally, I require the completion of the one-line diagram and approval from both a structural engineer and an electrical engineer.

I'm in need of a skilled electronic circuit and hardware engineer to help me with the design and selection of components for a project. The project involves the creation of a power supply, an analog digital converter, and a relay. Key Responsibilities: - Circuit design: I need help with creating the circuit for the mentioned components. This includes ensuring the circuit is efficient and functions as intended. - Component selection: I'll require assistance in selecting the right components for the circuit. It's crucial to choose components that are of high quality and fit the project's requirements. The ideal candidate for this job should have a solid background in electronic engineering, particularly in circuit des...

I need a skilled content creator who can provide various textual and vis...who can provide various textual and visual content to populate my website. The project involves creating content for more than ten pages. In the area of Mechanical equipment. Key Responsibilities: - Develop high-quality, engaging, and SEO-optimized written content for each page. - Source and format relevant images to accompany the text on each page. Requirements: - Proven experience in writing engaging web content. - Proficiency in SEO practices to ensure the content is search-engine friendly. - Strong eye for visuals and ability to source and format relevant images. This project is ideal for a freelancer who can work efficiently, has a background in content creation and SEO, an...

I’m in need of an experienced Excel software engineer who specializes in automation. The project revolves around automating data entry tasks in Excel. We are an accounting firm and I am looking to automate my compliance practices. Tasks include 1) rolling forward previous year excel work papers 2) taking information from. Client data sheets (excel) and importing into new excel workpaper workbook 3) data analytics based on metrics 4) hyperlink to source data Ideal candidates should have: - Proven experience with Excel macro programming and automation - Ability to work with numeric and legal data - Strong attention to detail to ensure data accuracy This will be a valuable addition to our workflow. Looking forward to your proposals.

I'm in need a freelancer to assist in the comprehensive design and development of a commercial electric car. This car will be a full hybrid, meaning it will be capable of self-charging, and will have a particular focus on energy efficiency. Key Responsibilities: - Full Exterior and Interior Design: This car needs to be visually appealing, and project a modern, sleek, and commercial image. - Mechanical and Electrical System Design: We need a team with a strong focus on engineering, able to create systems that are energy efficient and innovative. - Innovations: This is an important aspect of the project. We're looking for a team that can bring fresh ideas to the table, with a particular interest in self-driving capability, voice co...

I need an expert to establish my eBay marketplace for selling individual bottles of syrup for frozen drinks. The ideal freelancer should have experience in setting up and optimizing product listings on eBay, especially within the drink or food industry. Based in Brisbane Queensland Australia. Selling into states on Queensland, New South Wales, Victoria mainly. Key Responsibilities: - Create an inviting and accurate description of the product - Set up an efficient shipping and handling process - Handle customer inquiries and concerns. Experience: - Setting up eBay stores - Food and beverage industry knowledge preferred - Exceptional customer service skills. Have a sales/product history and profile from previous business Owner available.

I am seeking an experienced engineer who can assist me in the design and analysis of a new project. Ideal skills and experience for the job: - Proficiency in AutoCAD for design and analysis - Strong background in engineering, particularly in the area of design and analysis - Excellent problem-solving skills - Ability to work closely with me to understand my vision for the project and bring it to life

I need assistance primarily with setting up and operating my recording gear, specifically microphones, audio interfaces, and studio monitors. Additional support is desired in the area of sound mixing and editing. My Native Instrument Midi Keyboard also forms a crucial part of my setup. The purpose of these recordings is primarily for music production. Skills and experience in recording equipment setup, troubleshooting, and studio work would be ideal. Proficiency in sound mixing, editing, and knowledge about a range of instruments is a must. The technician will need to come to my location to hook everything up.

I am seeking a qualified sound engineer to help me achieve flawless sound quality at an upcoming live band concert. The duties expected from this role include: - Executing live sound mixing. This project will best suit someone with high expertise in this field. Previous experience working with bands is a plus. Good problem-solving abilities would be beneficial, given the live nature of the event. If this sounds like you, please apply. Your skills are needed to help make this event a sonorous success.

Please note that this is not for a particular role, this for representation. We work with all Casting Directors in Australia on all productions. We are seeking talented individuals to play varying roles. We receive briefs for Film, TV, and Commercials. We left the project duration field blank, this means there are opportunities for both short-term and long-term collaboration. Most jobs are between 4-8 hours or can be multiple days on larger productions. As experience is needed for some productions, inexperience actors are also welcome as there are allot of roles you don't need experience for as long as you feel comfortable in front of the camera. Please contact me if you have any questions. Regards Brad Walks Talent Management